A drywall niche is a recess in the wall, which gives plasticity and originality to the interior. The design of niches can be varied, it can be built directly into the partition or stretched instead of furniture along the entire wall. We present a good selection of photos.

Both simple and luxuriously designed decorative niche in the wall helps to visually expand the room and give mobility to the interior of the apartment. Most often, a recess in the wall is equipped with lighting, it looks very nice. The decor niche can be arranged for a specific work of art. For example, aristocrats usually placed in a recess large vases or statues of knights in forged armor. With its help, you can hide the flaws and defects of the walls.

Very comfortable and functional solution there will be a drywall niche for TV. It can come out of the wall or imitate a cabinet with an interesting backlight, and the wires from the equipment are easily hidden in the cavity under the frame. Such a niche cabinet structures the space and plays the role of an interesting well-thought-out source of lighting. For those who do not want to see the TV when it is turned off, you can build a decor niche on the principle of a closet. The design will be completely closed with a door or curtain. Options are shown in the photo.

A niche in the kitchen can be built under a bar counter, and if you equip it with doors, you get a bar cabinet.

drywall niche design

Using for finishing niches decorative plaster, colored glass, natural and artificial stone, you can design it in the same color as the walls, or on the principle of contrast, choosing a color darker or lighter by several tones.

You should not paint niches with dark colors against the background of light walls - you will get an unpleasant effect of "holes".

If desired, the niche can be an architectural composition with unique lighting and finishes, such as decorative, with a mosaic panel and unusual lighting, depicting a landscape that always favorite time of the year.

In the design of small drywall niches, it is preferable to use the same color palette, as for the walls (a few tones lighter). The smaller the recess, the smaller the decorative elements should be. If the decor niche consists of various shelves, then it will be original to decorate it with an unusual picture frame.

An actual option for small apartments is a niche device in the form of a miniature sofa. In the living room, the aquarium built into the decor niche looks very nice. In the bedroom, it is better to place it above the bed.

If you style a niche like an English grotto or a Japanese pagoda, braided flowering shrub, and place in it a large elegant bouquet in an artistic vase - it will look chic and impress the guests.

Drywall niches, the photos of which you see, can also be created in the kitchen. Additional built-in shelves for kitchen stuff will come in handy. From scraps of drywall, you can make a countertop, cabinet, shelves. Well, if necessary Dishwasher or the slab can easily be hidden in an artificial recess.

In the bathroom you can arrange very functional niches, turning them into shelves for storing hygiene products. With the help of a niche, you can turn the bathroom into a rotunda by lining the walls with iridescent mosaics and arranging decorative plasterboard niches in them, painted with white paint. luxury idea- directly under the bathroom, arrange a decorative niche in the floor, resembling an aquarium.

The decor of modern housing is not an easy task, it is often necessary to equip and decorate the space of the room enough big amount useful items, and at the same time not to lose vital space. Therefore, all the most expensive and important items get a residence permit on shelves or niches in a plasterboard wall.

For ordinary person venturing in the house design option repair, sheet drywall can be considered a gift of fate. The extreme simplicity of working with drywall walls with considerable possibilities for implementing the most interesting solutions design makes GKL the most popular material in the manufacture of plasterboard walls with niches.

Why are drywall niches so popular?

It so happened in the apartment samostroy that niches in plasterboard walls allow you to get advantages in the perception of the interior over furniture delights:

  • Get rid of hinged shelves on walls, whatnots or intricate coasters that greatly eat up the usable volume of the room;
  • Raise the most necessary things in life and pleasing to the eye on the walls, thereby giving them a new content, and updating the appearance by simply replacing some items in the niches with others;
  • Often, niches in drywall walls allow you not to use heavy furniture cabinets or other similar home "architecture", while successfully zoning the territory with architectural "highlights".

For your information ! The use of walls with a variety of plasterboard niches will allow you to properly distribute usable space rooms, periodically change the furnishings and interior of the room for a short time and at low cost.

Such experiments can hardly even be called a redevelopment of an apartment or room. Moreover, an unusual building in the living room with a niche in the drywall wall can be the most impressive impression of a renovation or interior renovation.

What are drywall niches

For the most part, niches allow you to "drown" some of the objects or even a piece of room space into the walls, a simple technique and quite often used in one-room apartments.

Most often made decorative niches in a plasterboard wall. Stylish things, even antiques, are additionally purchased for such projects, and interior items are often rearranged.

A simple idea will help to successfully refresh the look of the walls or enhance the feeling of comfort in any corner of the apartment:


Advice ! The classics of the genre have long been arches, combined with plasterboard walls - partitions and emphatically utilitarian wall niches for everyday items.

We divide the space in the room into personal and joint

Using a drywall wall with a niche is almost the only accessible way create comfortable conditions for work if there is a teenager in the house. The feeling of individualism and the desire to have the boundaries of your inviolable territory can be supported by a small drywall construction, while you do not have to block off an apartment or room with a wall of many furniture or wooden screens, curtains or doors.

But similar options will require knowledge of the basics of home construction of plasterboard walls, otherwise niches and openwork racks will make the structure weak and fragile.

We emphasize the recreation area

In addition to walls with niches and windows that allow a child or an elderly person to allocate his living space, a similar technique is used to isolate the recreation area and its holy of holies - sleeping places, an aquarium or a TV. In the latter case, drywall niches in the walls are generally out of competition due to widespread flat plasma or liquid crystal models.

For your information! An interesting feature niches and plasterboard walls is their relative facelessness.

An empty structure has nothing of its own until objects or things appear in it. Further, the drywall product turns into a frame or wrapper, skillfully emphasizing the style and character of the main subject.

A furniture stand or cabinet already has its own style and design, often with a modern TV it looks archaic or bad taste.

How to make a niche in a drywall wall

For a high level of decor, a perfectly flat wall surface and right direction lighting or additional illumination. It is not difficult if you try to take into account all the requirements for building a niche in a drywall wall.

Working with drywall in the manufacture of walls, partitions, arches or niches does not require exorbitant qualifications of the worker, only accuracy and an accurate understanding of the goal are needed.

If the plane is decorative drywall wall or its elements is provided by factory-made flat planes of the material, then in matters of lighting direction you have to break your head. Often, to ensure the desired effect, it is necessary to use two types of lighting. Applying sunlight or monochrome light under warm or cold color rooms can be achieved visual magnification the space of the room during the day and the opposite effect in the evening or night hour.

Niche - TV stand

The reasons for the popularity of drywall niches for the TV were mentioned above, consider the most popular option for making a large decorative design for widescreen TV.

How to properly position a niche for a TV

All that needs to be done for future comfortable viewing of programs at any time of the day is to take into account the recommendations of TV manufacturers and the wishes of family members:

  • The design of the niche must be securely fastened to the wall with support on the floor, the main support shelf is calculated and reinforced based on a double margin of safety;
  • In the niche itself, there should be plasterboard side walls of the rack, shading the TV screen from direct sunlight or bright lights;
  • Drywall conducts sound perfectly, which means that in order not to interfere with the rest of the family, it is necessary to use soundproofing from mineral wool or polystyrene, we also place external speakers or speakers in niches with sound insulation.

We assemble and fix the niche frame

We assemble the main frame of the niche-portal from a galvanized profile on a prepared wall and a wall sheathed with plasterboard. Under the niche, it is better to choose a 15 mm GKL sheet, since the dimensions of the individual elements of the niche are large enough and are calculated for the weight of the TV up to 10 kg in weight.

According to the markup, we sew on the wall and ceiling the main bearing structures profile.

Arches and roundings of the wall can be made of flexible metal inserts, or cuts can be made on the profile of one of the shelves. This will allow you to bend the profile along the required arc. You will have to sew rounded elements with the help of small pieces of drywall sheet.

The most difficult part will be to cut and precisely install the symmetrical rounded posts so that they exactly match the curvature of the left and right sides of the structure. After mounting the vertical racks, we attach the frame of the main shelf and auxiliary drywall niches to the wall for speakers and small items.

We lay soundproofing in the cavity of the walls and sew it up outer surface thin-walled 8 mm sheet.

Puttying and finishing the surface of drywall

Finishing work, as a rule, is no different from standard work with drywall products, but in places where large gaps have formed between sheets of drywall, it is better to use perforated plastic or aluminum corner to reinforce the putty layer.

We clean the wall in two stages with the removal of the rough layer and polishing in the final version with a fine mesh. After completion of the mechanical treatment, the wall is primed with a double layer for painting in the most suitable color.

Beautiful drywall niches in the living room: photos and design options, real photos of niches



























See also:

Niches for plasterboard shelves

If your apartment already has a niche in the wall of a particular room, then the most convenient and easiest way to use it is to make shelves in it, on which you can place books, vases and original figurines or souvenirs. But it should also be said that not all walls are perfectly even, but at present this is not a problem, since you can quickly and perfectly solve this problem with the help of a drywall sheet and a drywall niche in the living room will be very useful to you.











All those who love everything original and beautiful should definitely appreciate the superbly designed niche in the wall with decorative neon lighting. Niches with spot lighting also look very nice, besides, the lamp can be placed anywhere in the niche, at the top, down or sideways, or you can even highlight it from both sides. In addition, you can hide the wiring under the drywall, and place it in the niche itself beautiful vase, figurine or any other decorative element.








Drywall TV niche

In our modern times a large number of people refuse bulky furniture and household appliances. They are all possible ways trying to free up as much space as possible. This trend has not bypassed the old days and TVs, currently most of buyers opt for flat models that can not only be placed, but also hung on the wall, which is even more convenient. But quite often, most people, looking at a hanging TV, feel danger, as they are afraid to inadvertently hurt it. Yes, and hanging wires spoil the whole view, but with the help of a convenient and beautiful niche from drywall, you can not only hide the wires, but also protect the TV from falling, which is perfectly located in it. Also, the geometry of any room can be corrected by equipping a niche.



















For lovers of aquariums, you can also arrange a niche, if of course the volumes allow it, from drywall, it will also not occupy large area, which may already be missed and will serve as a wonderful magnificent decor for the interior.

If to speak in simple terms, a niche is not only a decoration, but also a practical product.

Illumination of a drywall niche photo

The photo shows niche lighting options. Today there is great amount beautiful stylish and creative ways niche design. It could be simple backlight or bohemian compositions. If you have chosen a backlight, this does not mean that you need to insert a lamp into every free place, you can simply install one built-in spotlight, and lay out the entire surface of the niche with a small mirror tile. By applying this decorating method, you can achieve the illusion of space.


















If you opted for the design of a drywall niche in a dark tone, then you should also use spotlights for illumination or decorative lighting placed on transparent glass shelves. Only in this design option your niche will not be boring, but will look beautiful and bright.

Do-it-yourself drywall niche in the living room

Information for sketch development:

  • the depth of the niche in the living room (for installing a TV) is equal to its thickness plus the space that the wires will take, electrical sockets. The screen must be flush with the edge of the opening. The same applies to other electrical equipment - only its frontal part should be visible;
  • leave gaps on the sides and top of the niche. Your hands must be free to pass into them, otherwise you simply will not be able to install the technique. The gaps, moreover, will help to avoid overheating of electrical equipment;
  • if the drywall niche is not floor-mounted, but built into the wall, then when laying the profiles of its bearing plane (lower part of the niche), you need to take into account the load that it will perceive. It is one thing if there is a vase in the niche, and another if there is an aquarium with water;
  • immediately determine where the electrical wiring will go - you will have to connect to it if you:
  • you are planning niche lighting; you are going to install TV, audio in the opening.

The sketch will give you a visual idea of ​​​​how a drywall niche should look like, it will help you calculate the right amount of material. The photo shows an approximate sketch of a rather complex niche, inside of which drywall shelves are made.

Installation of a crate (frame) from a metal profile

  • rack profile cd;
  • self-tapping screws ("fleas");
  • screwdriver;
  • drill;
  • dowel;
  • building level, pencil;
  • roulette, plumb.

The main rule of the finisher: if you don’t want alterations, use the building level. We expose the rear plane of the frame according to the sketch dimensions and fasten the guide profile to the floor, walls and ceiling with dowels. We insert and fasten the vertical profile cd into this “frame” in increments of 50 - 60 cm. If the wall is bumpy, then the ud profile is attached to U-shaped suspensions. At the junction of the rack and guide profile, the metal is fastened with “fleas”.

The front plane of the frame. Set aside from the already mounted back plane of the frame a distance equal to the depth of the niche. We draw a line along which the front plane of the frame will pass. We collect the front frame.

We reinforce both flat frames with horizontal jumpers from the ud profile. We cut it into equal pieces and insert them between the vertical profiles. We fasten the intersections with two self-tapping screws. Do not forget, in the place where you decide to make a niche, the profiles should form "windows".

We make the frame a three-dimensional structure. We connect the front and back planes of the frame with jumpers (ud profile). Pay attention to the photo. In places where the frame forms a niche, the profile is placed two at a time, and it is deployed in shelves from each other. This gives the structure additional rigidity.



Electrical connection

Planning to do your own lighting? Start now, before the frame is covered with drywall.

Decide on the type of lighting:

  • spot halogen lamps, if the opening is illuminated by several "halogens", then it is better to arrange them with the same step, the size of which depends on the power of the lamp. Connection of wires when connecting spotlights takes place with the help of clamps. From one end, stripped wires of the lamp are inserted into this device, and from the other, an electrical wiring cable;
  • LED Strip Light practically does not heat up, it is economical, but it is quite expensive. It is connected via a power supply, which most often has to be purchased separately. Be careful when connecting - mix up "+" and "-" and the tape will burn. The LED itself is attached to a sticky layer applied to one of its sides;
  • if the drywall niche will be illuminated by an overhead lamp, then in the frame it is necessary to provide embedded profiles to which the lamp frame will be attached.
Electrical cables are hidden in corrugated hoses(according to the requirements of the PUE). To attach the corrugation to the wall or ceiling, you will need clips (fasteners) and dowels.

Cutting and sheathing the frame with drywall

The easiest of the stages, for those who do everything with their own hands, but it is on it that novice masters make mistakes. Cutting will require all your accuracy and scrupulousness. Make a mistake in transferring dimensions, and the drywall sheet may go to waste. For work you will need: tape measure, drywall knife, rail, pencil. Then everything is simple:

  • put the sheet on the table and mark the outline of the future part;
  • cut: do not put a lot of effort - cut the paper, and the plaster will break easily. Cut through the paper on the other side. Separate the detail.

In order to sheathe the frame, you will need: a screwdriver and self-tapping screws 25 - 40 mm long. The fastening step with self-tapping screws is taken at least 250 mm, and in the niche area - at least 150 mm. We retreat from the edge of the sheet about 1 - 2 cm. When sheathing the frame, make sure that the edge of the part lies on the profile - if you leave it to “sag”, then a crack will definitely appear in this place.

Sheet end processing

There are many places in the niches where drywall sheets meet at right angles. From the ends of such sheets, you need to chamfer at an angle of 45 °. An edge planer for drywall will speed up this stage of work by an order of magnitude. After the edge has been cut, some builders still grind the bevels with a rough planer or hand rasp.

The edges of the sheets that are joined end-to-end are machined at an angle of 25°. Why is this necessary, when filling a niche, a tubercle is formed at the junction of the raw edge. To even it out later, you have to apply more thick layer finishing putty. This is hard work if you do everything yourself, so the ends of the sheets are chamfered.

Primer and putty

  • we prime all joints of the niche;
  • we cover the joints with a starting putty with a consistency of sour cream. We mark the joint lightly with a spatula and put a reinforcing fiberglass tape on top of the putty. "We smear" it into the mixture. Do not forget to seal the caps of the self-tapping screws, which are especially numerous in the niche area;
  • the second layer of the starting layer of putty is applied the next day. After drying, the joints are cleaned;
  • the finishing putty mixture is applied.
To make the drywall niche look neat, the internal and outside corners it must be closed with a perforated corner. He “sits down” on a thick starting layer. The excess is removed with a spatula. The photo shows an already installed corner, covered with a reinforcing mesh.

Niche decor

To decorate a niche in a plasterboard wall, you can use any decorating coating - paint, mirrors, wallpaper, beautiful fabrics. There are some simple tips which will be useful to you.

  • give preference light colors- dark openings light walls will look like holes in cheese. Most often, drywall niches are painted in the same color as the walls, or 1-2 tones darker. Only if the recess is well lit can saturated, dark tones;
  • mirror finish of the opening visually expands its space;
  • color design niches within the room should be the same.
Sources: ispovednik.ru, ihouzz.ru
  • Balcony Balcony and Loggia Repair Dreams of a home owner about a warm, comfortable balcony or loggia are feasible. One has only to want, having required amount bills, and dreams will turn into reality. Combining a glazed, insulated balcony with a room and a kitchen, turning a loggia into a winter greenhouse or into a separate living space - all this can be done, and with your own hands. In this section of the site you will find step-by-step instructions for insulation and glazing, as well as installation and installation finishing balconies and loggias. They will help you do the work yourself or professionally evaluate repair work made by qualified builders.
  • Bathroom Bathroom renovation hot bath you probably want to relax. beautiful ceiling, luxurious walls and floor are very conducive to this process. Few owners of square meters» refuse to use high-quality plumbing, faience sanitary products, home appliances and equipment. The publications collected in this section of the site will help you choose the right ones for you. Appliances, plumbing and finishing materials. Even in Khrushchev, this is a room whose area does not exceed 2 square meters, with proper planning, can look great and meet functional requirements.
  • doors Entrance and interior doors - selection, installation, installation My home is my fortress. This is how the English lawyer Edward Kok once described the feeling of security in his home. But not a single outpost will be reliably protected without strong, and sometimes even armored gates. A modern apartment, like a medieval citadel, needs protection in the form of front door. We think if you protect the entrance to the apartment with modern door block, a sense of security will settle in you forever. But that's not all. Members big family, who have their own personal space in the house, instinctively want to isolate themselves at least for a while, even from relatives. And here it is impossible to do without interior door. This section of the site contains publications on the selection and installation of entrance and interior doors.
  • Kitchen Kitchen renovation The kitchen is undoubtedly the most popular room in a modern apartment. We cook in it, and often eat food, unless, of course, a dining room is provided in the house. During the preparation of culinary masterpieces, the hostess spends almost all her free time in it. It is important that the necessary kitchenware, household items and equipment were at hand, and the furniture was located so as not to hamper the movement of the cook. In this section of our website, we will talk about finishing materials compatible with food and their application. Our step-by-step instructions will allow you to do your own kitchen renovation or teach you how to supervise the work of a hired repair team.
  • Repair materials The choice of building materials and their description Materials for repair is a capacious concept that implies thousands of names, hundreds of groups and dozens of categories of building materials. They help to realize the wishes and dreams of a comfortable, functional and convenient housing that meets the requirements. At the same time, the appearance and quality of the elements of your home directly depends on the chosen building materials. In order not to regret the wasted money when poor quality finish fall off or lose decorative properties, purchase only repair materials tested by professionals. Do right choice The publications collected in this section of the site will help you.
  • Window Windows and balcony frames An important element of a modern apartment is a window. And the question of what it is made of plays an important role in ensuring comfortable living in this apartment. After all, in addition to protecting the room from atmospheric phenomena, the window protects from street noise, especially when the room is facing a busy highway. This section contains materials on the manufacture, appearance and window features balcony frames for your apartment or private house.
  • Floor Repair and finishing of the floor An integral part of the interior of the dwelling is the floor. The problem-free living of households is associated with the state of the basis of sex and floor covering. Even the health of the inhabitants of the apartment directly depends on whether the floor is warm or cold. This is especially true for young children who spend most of their time in games, on the floor. Modern building materials require absolute evenness of the base on which laying is planned. This section of the site combines publications in which we describe and show the process of preparing, installing and installing screed, "warm floors" and finishing.
  • Ceiling Repair and decoration of the ceiling It is known that ceilings in modern apartments are not very even. The team of our site, relying on great experience, will tell you many ways to repair, level and finish them with finishing building materials. Stretch - PVC and fabric, suspended - plasterboard, coffered, armstrong and grillto, pasted over with wallpaper and painted with paints. Each type of ceiling can become a real masterpiece. Step-by-step instructions, photos and videos about the installation or installation of each type of ceiling are collected in this section of the site. With the help of these materials, you can easily do everything yourself or professionally control the craftsmen hired to carry out the work.
  • Walls Erecting, leveling and finishing walls Having a roof over your head is certainly great, but it would not hurt to lean on strong walls built for centuries. In apartments of block and brick high-rise buildings, they are naturally strong, but crooked, like a janissary's saber. Therefore, before finishing, they need to be leveled, and at the same time soundproofed to isolate themselves from noisy and reckless neighbors. And the walls bordering on the atmospheric environment also require insulation. In this section of the site, we have collected descriptions of building materials and step-by-step instructions for installing, assembling and fixing the finish, as well as sound, noise and even waterproofing walls.
  • Toilet and sewerage Renovation of the toilet The age of the Internet and urbanization, superspeeds and stress leaves little room for solitude and the opportunity to calmly reflect on the complexity of life. Household chores are also not conducive to special philosophical activity of the brain. However, during the day, even a super-busy person finds time for solitude and calm reasoning. This time is dictated by nature itself and the place for it, no matter how ridiculous it may be, is the toilet. This section of our site contains publications on the arrangement of the toilet, sewerage, on the choice of plumbing and its installation.

If you do not need to completely isolate these zones from each other, you can create monolithic wall through or one-sided niches. They can easily fit any elements of decorating the room, you just have to take into account their size during construction.

An aquarium or a lamp that occupies the entire space of the recess will look very impressive.

Such a technique in construction is very convenient, for example, in a children's room. If you have two children, and there is only one children's room, then each child has the right to his own personal territory. By dividing the room, you will achieve your goal - everyone will have a personal territory, but at the same time they will always spend all their time together.

The same goes for other areas of the apartment. They can be separated cleanly decorative partition with niches or recesses with a specific purpose.

It is very difficult to do without this method of finishing in fashionable studio apartments today, where there is only external walls, well, and a one-piece "box" of the bathroom and toilet.

Niche on the ceiling

In the production of a multi-level suspended ceiling, it is difficult to do without the equipment of recesses. Many masters advise, in addition to quite natural transitions from one level to another, to also make a niche for the cornice.

It carries a specific target load - it hides a device for hanging curtains from our eyes. Such a recess is especially relevant for heavy curtains, the weight of which the GKL may not withstand.

Curtains falling from a recess in the ceiling look very impressive and will delight your eyes for a long time.

Where can niches be applied

Drywall in the interior of your apartment with niches can be erected in any room, even in “wet” ones. The only condition in this case would be to apply moisture resistant drywall who endures high level humidity.

This element of decor is easy to do with your own hands, the main thing is to correctly understand how to erect the frame of the structure and mount the plasterboard on it. After the construction of the structure, you will have to finish the wall and niches with the building material you like.

In modern design studies of the interior of an apartment are often used various options drywall niches (Fig. 1). They are needed not only for decorative finishes premises, but also perform various functions:

  • used as shelves for various small items;
  • are used for drowning a TV and other household appliances into the wall;
  • for setting up an aquarium, etc.

Figure 1. In a niche for a plasterboard TV, you can place room decor items.

When using niches, you can save a large amount on decor and furniture, close the uneven walls of the room. Using the backlight, you can achieve the realization of the most fantastic ideas of the designer. At interior decoration niches you can use the following items and materials:

  • mirrors of various shapes;
  • wooden structures;
  • installation of artificial gypsum stone;
  • contrasting wallpapers, etc.

How to make a drywall niche with your own hands? What methods should be used for this? If a person has the skills to handle a tool, then he can easily make niches of rectangular or square shape and make their interior decoration.

Preparatory work

Figure 2. The niche frame must be of rigid construction and attached to adjacent floors, walls, and ceilings.

To create such a design, you need to purchase tools and materials on the construction market:

  • drywall sheets;
  • perforator and screwdriver;
  • metal profiles and fasteners.

Need LEDs for illumination different color. Before work, you need to determine the location of the future niche. This can be done in any room of the apartment where there is a free wall.

Its length must be at least 3 m. It is best to mount the structure in the center of the wall - this will not violate the symmetry of the room. Drywall is a rather fragile material, so it is fixed on metal profiles aluminum or steel.

If the niche will have a shallow depth (no more than 25-35 cm), then load-bearing frame it will be necessary to attach both to the walls and to the ceiling. Using LED backlight electrical wiring is carried out under the surface of the GKL or the power cable is passed through hollow baseboards along the wall.

In this case, it is necessary, in accordance with the safety regulations, to make the grounding of the entire structure. All wires are laid in corrugation or tubes made of plastic or metal. The power supply is also hidden under the cardboard. Its power should not be more than 50-65 watts.

Back to index

Making a drywall niche

Scheme for obtaining rounded parts from drywall.

First, on a sheet of paper do preliminary design in all desired sizes. Then, after a certain adjustment of the drawing, they transfer it to the wall.

To do this, you can use a colored marker. Using the building level to control the verticality of the installation, mount the guide profiles with dowels to the floor and ceiling. Then they strengthen the planks for the walls.

Jumpers and shelves are cut from metal guides and the main structure is assembled according to the draft drawing. They are attached with metal screws or so-called fleas are used for this.

The frame must be rigid and solid construction, well attached to the wall and ceiling (Fig. 2). Then move on to drywall. When buying, you need to choose sheets with a thickness of 12-14 mm - they are designed to cover walls.

For their cutting, a construction knife with replaceable blades is used. You can use small files for this or electric jigsaw. Niche details are cut according to the sketch and attached to the frame with screws. Coating internal parts niches must be made from two pieces of drywall, which are superimposed on each other. If it is decided to use wood for the shelves, then they are made from boards desired width, cutting into internal dimensions niches hand saw. Then they can be painted or varnished. In the resulting boxes, you need to make holes for the lamps.

Back to index

Puttying of external surfaces

Figure 3. The scheme of sealing seams and joints in drywall.

Having finished the installation of the sheets, work begins on finishing the niche. It begins with puttying the seams and gaps between the installed sheets. To do this, they impose a special adhesive tape and cover with putty.

These materials are purchased in the construction market. When performing this operation, corners are put on the corners of the niche - they must also be puttied, like the heads of the screws (Fig. 3). After that it can be done final finishing niches. To do this, you need to choose the type of decor that is most suitable for this room:

There are many other options, you just need to look through the relevant literature and choose the one that you like best.