Do you want your child to spend time fresh air and was in plain sight? Worried about the safety of your baby? Then it's time to make a children's swing with your own hands! Thanks to this solution, you will not only save money, but also get the opportunity to make a design taking into account all your wishes. Make a swing "for growth" or organically fit children's Corner into the landscape? Easy! And it’s better to start by studying the five best options for implementing the playground.

Swing typology - exploring available options

Why reinvent the wheel if everything has already been invented before us? But it is possible and even necessary to add your own zest to the site project!

Swing as an element of the site

So, depending on the type of swing, the requirements for their layout also change:

  1. A swing with a single axis of rotation is the classic and simplest in execution. The seat in them can only move in one direction (forward and backward), perpendicular to the beam on which the structure is suspended. The minimum height from the surface of the cover to the seat in this embodiment is 35 cm.
  2. Swing with several axes of rotation (the seat also moves from side to side). Suitable for older children and quite difficult to perform. The minimum distance to the ground is identical to the first type (35 cm).
  3. Swing with one suspension point ("nests"). In this version, the suspension elements (ropes or chains) converge to one point, tapering upwards. Such a projectile must be located at least 40 cm above the surface of the site. The same distance must be left from the seat to the supporting structures.

Classic swing with one axis of rotation

Advice! It is advisable to install several swings of different types on the site or one large one, which would fit at least two children. After all, guests will certainly come to your child!

What and how to make a swing - TOP 5 options

Resourceful parents use the most different materials. DIY hanging baby swings can be made from car tires, ropes, and even rims from an old bicycle. But you must remember one unshakable rule: all elements of the suspension must be flexible! It is not allowed to use a swing suspended, for example, on metal pipes or other hard parts.

Creative swing-airplane

Cradle seat made of PVC pipes

After the construction, leftover PVC or polypropylene pipes? Fine! They make an excellent swing for a small child.

Attention! Products from PVC pipes are collapsible due to fittings, so you can correct the mistake made during the manufacturing process at any time. Whereas polypropylene will have to be connected by soldering.

Swing made of polypropylene pipes

To make a cradle seat, you will need:

  • PVC or polypropylene pipes 25, 32 or 40 diameter;
  • thick plywood;
  • fitting;
  • tools for cutting and soldering pipes;
  • bright paint for outdoor work.

When taking on the manufacture of a children's swing with your own hands, remember the importance of coloring the elements of the playground in bright colors. The child perceives contrasting shades better peripheral vision. Therefore, when playing in the sandbox, he will notice with peripheral vision that the swing is already occupied, and will not fall under the swinging structure.

In order to make a swing, the pipes must first be cut:

  • 2 pieces of 30 cm (side rails);
  • 1 piece 40 cm long (back);
  • 4 pieces of 25 cm (for the seat);
  • 6 pieces of 20 cm (for the sides).

A sheet of plywood should be attached to the finished seat, having previously drilled holes in the pipes, and hang the structure on a chain.

An easier way to make a children's swing with your own hands is presented in the video instructions.

Video: Children's swing made of polypropylene pipes

https://goo.gl/TFDrnx

Important! Swings made of polypropylene pipes are not very durable, as this material becomes brittle when exposed to the sun. But such a product will last for a while until the child grows out of the cradle seat.

How to make a swing nest from a bicycle rim

Swing-nest, his appearance more reminiscent of a small hammock, this is one of the most favorite children's equipment. You can ride it both sitting and lying down, and if the size allows, then even together!

To make you will need:

  • bicycle rim with a diameter of 29 inches;
  • thin polypropylene pipe;
  • 4 rings and 2 carabiners for fastening;
  • colored and white rope.

Instructions for making a swing seat:

  • Bend the polypropylene pipe and pass it inside the rim, tying the structure through the holes for the knitting needles.
  • Weave a "seat" from a rope according to the dream catcher pattern provided below.
  • Wrap the entire structure with colored ropes, thread the rings for fastening and hang the swing.

Dreamcatcher diagram for the seat

Advice! On top of the rim with the pipe, you can lay pipes for thermal insulation of pipelines. They will seal and further secure the structure.

Metal swing - how to weld a children's corner

It is not difficult to make a children's swing with your own hands from metal, as in the photo. But to make such a design safe for little fidgets is much more difficult.

metal swing L-shaped

First you need to decide on the type load-bearing structure. For a U-shaped swing, you need a serious foundation. Whereas L- and A-shaped structures can be installed simply on the ground, digging the supports a little.

Scheme of a children's swing with a ladder and a horizontal bar

The spacers of the L-shaped swing can be welded together by making the lower harness. Such a design will be portable and at the same time stable enough to do without a foundation. However, the elements of the lower harness need to be slightly deepened into the ground or sand in order to protect the child from hitting the metal when falling.

How to make a children's swing from metal with your own hands:

  1. Pipes of 32 diameters (you can use the old ones left after dismantling the heating, etc.) cut into size. You will need: 4 pieces of 250 cm for the “legs” of the L-shaped swing and 5 pipes 240 cm long (4 for the bottom harness and 1 for the top bar).
  2. Weld the frame according to the diagram below.
  3. Clean the metal, prime the structure and paint it in 2 layers.
  4. Dig a square trench with a side of 240 cm and install a swing in it.
  5. bottom harness fix with reinforcement (drive in sections of rods and bend them, fixing the pipes of the structure).
  6. Fill the trench with sand and stones, level the site.

Wooden swing for a fun company

To make a children's swing made of wood with your own hands, you need:

  • glued laminated timber 8 by 8 or 10 by 10 cm;
  • thick plywood;
  • larch or other hardwood;
  • boards;
  • chains, eye nuts, screws, self-tapping screws, studs and bolts.

Wooden swing for children

Instructions for the construction of a children's swing for two:

  1. Using a garden drill, dig holes 1–1.5 meters deep and 20 cm in diameter.
  2. Make "sleeves" from roofing material (cover the walls).
  3. Throw broken bricks or large stones into the pits and fill everything with concrete.
  4. When the concrete sets, mount the metal corners (mortgages) on which the supports will be installed.
  5. The above-ground parts of the concrete pillars are sanded with a grinder and painted in a bright color.
  6. Tighten the base with 120 screws, after making a cut in the timber and installing the studs. Cut out the spacers and attach them to the L-shaped base on the studs.
  7. Make a seat out of thick plywood and larch boards or other wood using thin self-tapping screws. Coat the structure with a special varnish and attach a chain along the edges.
  8. Make cuts in the pillars and install them on the corners.
  9. Hang the seat on the chain.

And for the little ones, you can build a mini-hammock in which the baby can even take a little nap! To do this, you need a dense fabric, ropes and wooden planks.

Swing-hammock for a small child

Riding on a tire - tire placement options

It takes very little time and a minimum of materials to make a children's swing from a tire. But the pleasure that the child will receive from skiing is simply enormous.

Swing for the little ones

How to make a children's swing from a tire with your own hands:

  1. Mark the tire - draw a rectangle in the middle of the tire (the edges must be left for the handles).
  2. Carefully cut out a piece of rubber and bite off any protruding metal pieces of wire from the steel cord (or sand the edges).
  3. Turn the tire with the tread inward so that the child does not get injured when the swing hits.
  4. Fix the structure on chains and hang it from a tree branch or crossbar on carabiners.

An ordinary car tire opens up a huge scope for imagination. You can cut a horse, a tractor or a real bike out of pliable rubber! And you can make a bungee for a child's games.

Tire swing horse

Ten important rules for child safety

DIY hanging children's swing must comply with the following rules:

  1. If the seat has one suspension point, the fastening of its elements must be done in such a way as to prevent twisting when swinging. Ropes or chains must not be twisted together during use!
  2. If chains act as suspension elements, it is better to cover them. For this, unnecessary garden hoses! So you protect the child from getting fingers in the chain links.
  3. Do not place more than two swings on one frame. Otherwise, there is an increased risk of children colliding when swinging.
  4. The landing zone should be covered with sand or cut bark. This will cushion the impact of the inevitable falls.
  5. The seat should be light (plastic, rubber, wooden) and sufficiently springy (it is desirable to upholster the sides with rubber). This will protect the child from injury when hitting the swing.
  6. Do not plant plants with thorns around the perimeter of the landing zone.
  7. All wooden parts should be carefully processed with a planer, sanded and coated with a special varnish to protect children from splinters and scratches. And bolts and other metal mounts- drive into a tree so that there are no protruding parts.
  8. The most secure is the L- or A-shaped form of supports. At the same time, the wider the span of the "legs" of the swing, the less the load on the structure during its use. Accordingly, the slower the parts of the projectile wear out.
  9. Remember that the carabiners on which they mount hanging swing, need to be replaced annually, because they wear out very quickly! Do not hang the structure simply on hooks. With active rocking, they can easily break. It is more reliable to use carabiners with plastic inserts that protect the part from abrasion.
  10. It is better to impregnate the rope at the point of contact with the attachment point engine oil or saline. This will prolong its service life and protect the child from falling as a result of a cliff.

Triangular spacers for child safety

Children's swing is an occasion to involve the whole family in the manufacturing process! Everyone can help. And even the smallest member of the family, for whom the structure is actually being built, must take part in the work. The main thing is not to forget about the safety of the crumbs!

Video: do-it-yourself swing for a summer residence

We will send the material to you by e-mail

You can create these designs yourself or purchase a ready-made factory-made kit. In any of the options, it is necessary to study in detail such a popular version of children's fun as a children's street swing for a summer residence. Types, materials, manufacturing of such a design are different huge variety, so the information presented in our review will come in handy when choosing the right products in the store. It will also help you not to make mistakes during the implementation of the corresponding project with your own hands.

High-quality swings are an indispensable component of a full-fledged playground

For whom and what are the benefits of a swing for a summer residence: obvious facts and important nuances

Do not assume that swings and slides are only for children. Beautiful products will decorate any. Sturdy structures are able to withstand the weight of a teenager and an adult. It should be remembered that the appropriate entertainment and play facilities will distract the child from other activities for a long time. This tool will "create" free time, which parents can use at their own discretion.

After a careful study of this issue, it is not difficult to formulate the following positive results:

  • Swing for babies - effective remedy replacing the cradle. With their help, they create specific movements without any extra effort so that the baby falls asleep peacefully.
  • When the child begins to walk, the garden children's swing will help develop vestibular apparatus, dexterity, strength. They will be useful for studying the world around us and our own physical abilities.
  • Even a small home swing for children in an apartment is quite suitable for teaching independent actions.
  • Double and balancing stationary models for a child in the country will help to establish communication with peers.
For your information! Attractive, thoughtful design provides good conditions for physical activity. It distracts attention from computer games and other sedentary activities. Quality children's sports complex with a swing for babies is an effective preventive measure. It improves health, improves the protective functions of the body.


The above photos with comments explain the need for serious preparation for this project. Double swing must be calculated for a solid weight. Outdoor structures, adults, are created with a sufficient margin of safety. Decorative and protective surfaces and materials are selected taking into account natural influences. You should create a diagram with dimensions, a list of components. It will be useful to study the reviews of the owners if a decision is made to purchase a finished product in a store.

Classification of materials for children's outdoor swings for summer cottages, taking into account consumer characteristics

In any case, it is necessary to decide on what to make the appropriate design from. The following list contains general requirements:

  • The cost of suitable materials should be reasonable. When calculating, it is necessary to sum up the costs of purchase and transportation, processing and installation.
  • Finished products will be used outdoors. Changes in humidity and temperature, direct sunlight, and other external influences should be taken into account.
  • The reliability of structural elements and joints should not be in doubt. We must remember about static and dynamic loads.
  • It will come in handy if too careful care is not required for a long service life.
  • V collapsible structures have to pay Special attention strength of joints. But such products are easier to repair. After finishing summer season they can be dismantled for subsequent storage indoors.

Country wooden swing: ease of processing and other advantages

The simplest outdoor swing for children in the country can be done in a couple of hours, no more. From the board after processing the edges, you will get a good seat. So that the rope cables do not come off, notches are made in this part. Garden trees should be carefully examined. A strong branch at a height of 2 meters or more from the ground will do. A clamp is installed at the place of installation of the upper mount, which will prevent contact between the rope and the tree. This will increase the reliability of this node.

For your information! Note that written documentation makes it easier to install correct sequence assemblies.

Video: do-it-yourself garden swing made of wood

Plastic swing hanging and balancing: features of the use of materials

The various designs will be discussed in detail below. But for an objective analysis, it is better to take into account some parameters of different models when studying polymeric materials.

To make such a product reliable, the developers correctly distributed stiffeners in the most critical places. It can be seen how smooth shapes can be created from plastic, without sharp edges and other unsafe elements. This lightweight design can be easily moved to Right place. The wide base of the central part provides good support. To improve stability, this part can be made hollow. Inside, for weighting during operation, you can fill in water, or fill in sand.

The grooved surface of this seat prevents slipping. To prevent the ropes from fraying, they are passed through special tube inserts. They are securely fixed with special blocks with retaining rings. In the lower part, ribs are visible that increase the rigidity of the structure.

Based on these examples, the advantages and disadvantages of plastics can be formulated:

  • These materials make cute products for children, resistant to various types external influences. Dyes are added to the base of the mixture, so the brightness of the colors is maintained for a long service life.
  • Polymers are well suited for creating complex products. With the correct design of the project, it will be provided high level security.
  • Plastic structures even with large sizes weigh a little.
  • The main disadvantage is the relatively low resistance of parts made of cheap hard grades of polymers to strong impacts. It should not be forgotten that the strength decreases with decreasing temperature.
  • It should also be noted low maintainability. Adhesive joints in this case are recommended to be used only for attaching decorative elements.
  • Some types of polymers are destroyed by ultraviolet rays, release allergens and unpleasant odors when heated. It is imperative to take into account possible adverse factors when choosing suitable products for the child.

Metal swing for giving: reliability and durability

Metal is heavier compared to wood and plastic. But it is from it that parts are made, designed for high loads. This material is often used to reinforce structures, the manufacture of the most critical elements of supports and fasteners. The main disadvantage is the need for protection against corrosion processes. It should also be noted the following nuances that will prevent successful implementation relevant project:

  • It is not easy to make high-quality outdoor children's swings from steel with your own hands. The material is difficult to process, cut off.
  • To speed up work operations, you will have to purchase drills and hacksaw blades "for metal", tools with powerful electric drives.
  • You can create a curved pipe shape without damaging the workpiece on a special one.
  • The manufacture of forged elements and welded joints will need to be mastered. To accurately reproduce these and some other working technologies, appropriate equipment is needed.

These comments should be carefully considered in order to realistically assess the prospects for future action. At a minimum, a preliminary design selection and drawings will be required. With the help of these materials, it will be possible to conclude whether it is worth creating a country swing yourself.

With the help of this picture, you can study the individual elements:

  • The most difficult knot here is a special mechanism (I). It provides support and swing of the rocker arm (1) on the axis (11), free rotation by 360 degrees around the central shaft (8,9).
  • The holder (3) fixes the required position of the ball bearings (4, 5). Removable cover (2) provides protection against dust and precipitation.
  • The rocker is made of a pipe 48 x 3.5 (diameter x wall thickness in mm). This part is welded to the cheeks of the bracket (12) with a strip (40 x 5 mm).
  • We make support legs from a pipe (33.5 x 3 mm). Frame (15) and handle (13) made of metal bar (12 mm).
  • For the manufacture of the seat can be used wooden board, or plywood with a thickness of 10 to 12 mm.

Prior to assembly, all external surfaces of metal parts, except for bearings and axles, are coated successively with a primer and paint. Lubrication is applied to the moving joints to reduce the coefficient of friction and eliminate extraneous sounds. The wooden parts are carefully treated with sandpaper, impregnated with anti-rotting agents, varnished.

For your information! The whole project can be divided into several stages. Part simple details and assembly can be done by yourself. Welding joints and other complex operations are easier and cheaper to entrust to professionals.

From this photo it is clear that it is difficult to create such a design at home.With the help of the video, you can find out how to make a homemade swing for the street and cottages:

Related article:

There are many options for sale finished devices, but it's much more fun to make them yourself. Drawings, dimensions and photos various designs described in the article will help to cope with this task.

Classification of construction types of children's outdoor swings for summer cottages

From the examples given, it is clear that a combination of several materials is most often used. This allows you to better use the existing advantages and at the same time reduce Negative influence shortcomings.

How to make beautiful quality product it becomes clear if we consider in detail the different types of swings for children. The following photos with comments provide recommendations for performing work operations and creating individual units, examples of completed projects.

The most difficult technological processes easier to learn with the help of such materials. Here, for example, it is described in detail how to weld a frame from steel angle:

Please note that in addition to a special rectifier and electrodes, you will need gloves, a mask, and other means. personal protection. Works are carried out in a place specially designed for this, with strict observance of safety regulations.For installation suspended structure on a tree, you need to figure out how to fix it so as not to damage the fulcrum during operation.

Here the author of the project used a hook with a latch. She provides secure fixation, but does not prevent dismantling if such a need arises. In this example, not only advantages, but also disadvantages can be noted. In the assortment of a specialized store, it is not difficult to choose components with the expectation of certain loads. But the ring and hook at the point of contact will be subject to wear. The paint layer will be quickly destroyed, traces of rust will appear. Here you will not learn how to eliminate creaking during use with the application of lubricant.

The easiest way to use such pendulum products. To accommodate them, you just need to choose a flat area in the yard that is suitable in size.

Important! Pay attention to the hardness of the surface in this option. If necessary, special stands are installed under the legs, increasing the area of ​​\u200b\u200bsupport. You can also use a suitable sized reinforced concrete slab, or pour a small mortar foundation with reinforcement.

The swing is round, with a net, removed to a storage place in winter season. In the spring - just check the attachment point. If everything is in order, with the help of a ladder in a few minutes such a nest will be brought into working condition.

It is more difficult to figure out how to install stationary street structures. For a large heavy structure, you will have to create a reliable one. In the calculation, it is necessary, the features of the soil, the depth of groundwater. In domestic climatic conditions at severe frost heaving forces are capable of pushing out the beam, breaking the correct geometry.

The last two photos are factory products. Their and other professional solutions can be viewed to take advantage of ready-made ideas to implement their own plans.

The following list shows the classification of products of this type according to several main parameters:

  • Models for indoors and outdoors - differ in the level of protection from external influences.
  • Portable swing can be moved to another place, disassembled for storage in the winter season. Stationary structures are designed for year-round operation.
  • By design, suspended and balancing models are distinguished. There are mods in every category. Rigid, flexible stretchable suspensions are used. To ensure the possibility of movement in several directions, the support units are equipped with bearings, springs.
  • Swing with single, double large seats.
  • Grouping by materials is relevant only to the main structural elements. In practice, different combinations are often used: a metal frame, rope suspensions, plastic and wooden seats.

Powerful electric motors power large swings and carousels in amusement parks. For private structures, such equipment does not make sense, because one of the main functions of the corresponding product is the development of the physical capabilities of the child.

Below is information about what other designs are and how to build a swing from pipes, rings, and other standard products.

Children's hanging swing

Based on the knowledge gained, it is not difficult to formulate a list of requirements for individual parameters of the future project.

You need to make sure that there is enough free space. With the maximum amplitude of movements, it is necessary to exclude the possibility of contact with walls, pieces of furniture. For this reason, it is not recommended to install rope structures in arches, doorways. Here it is better to use rigid suspensions for swings with fasteners that block movements in lateral directions.

Multi-point soft belts are designed to fix the body. Rubber feet prevent the product from sliding on smooth floors. Soft pads on the bars prevent injury. Such a swing for the house is quickly dismantled. Therefore, during the summer holidays, you can take them with you to the country. But we must remember that many of the models of this type are designed for indoor use. Fabric and some other elements will be damaged by precipitation and other natural influences.

This project was created taking into account the peculiarities of a particular interior. It does not imply the possibility of moving the swing to another place.

But upon careful study of this photo, it is not difficult to find out that such a wooden swing is not too difficult to make with your own hands. Chains, rings, fasteners are standard hardware. Beams and other wooden parts can be ordered at, or created independently.

Important! It should not be forgotten that all street structures made of such materials must be protected. special impregnations and varnishes from insects, rain and sun.

Children's rope swing

The board cut to the desired size is carefully cleaned, burrs are removed, and the edges are rounded. It is fixed on the ropes with their own hands, choosing a suitable tree branch. The whole process will take no more than an hour using improvised materials, inexpensive carpentry tools.

Swing on chains

On such suspensions you can fix enough heavy construction. Maximum permissible loads can be taken from the accompanying documentation for chains of a certain brand.

Welded joints, forged elements are used here. Rigid frame made of metal. Pleasant "warm" seat - made of wood. A large translucent polycarbonate sheet protects well from rain and sun. It weighs a little, so it does not create unnecessary loads on the power elements.

How to make a pipe swing

One of the advantages of this solution is simple assembly. All products exactly correspond to the dimensions specified in the project. The kit includes the necessary fasteners. The table below shows the main characteristics:

This figure shows that the dimensions of the product are set based on the growth of future users.

Do-it-yourself swings for children from plastic parts can be assembled quickly. They are distinguished by light weight, high resistance to atmospheric precipitation, democratic cost.

Important! It should be remembered about the limited load capacity of such plastic structures.

Hoop swing

The following algorithm will help you figure out how to weave a swing yourself:

  • At the first stage (1), two ropes are knotted on the hoop under acute angle. A similar component is created on the opposite side with a looped overlap in the center during installation.
  • The same assembly is installed in the perpendicular direction (2).
  • Continue to fill the free space under different angles(3). All ropes are pulled with force so that they do not sag.
  • At the final stage, a circular track (4) is installed. Fixation sites (nodes) are marked with blue dots.

Children's swing balancer

A similar design of domestic production costs from 5500 to 7800 rubles. They offer welded products, for the transportation of which it is necessary to use a suitable vehicle. If you purchase a collapsible kit, you can install it yourself. In the performance "for the street" intensive use is expected, including on public children's playgrounds. With personal use with relatively lower loads, the service life is much longer.

Elements of a children's country swing

In this section of the site, the individual components of the structures are studied in detail. This data will be useful when choosing components for a particular project.

swing seat

Canopy for swing

Different materials can be used to create a quality swing for a summer residence with your own hands. The photos below show examples of relevant engineering solutions:

Frame for children's swing

Bearing elements, connections, attachment points must withstand the weight of the structure itself and users without damage. It is necessary to take into account the additional dynamic loads that are formed during the use of the swing. Below are examples of individual engineering solutions that are used in practice in professional and home-made designs.

Where and how to buy a children's swing for a summer residence

PhotoModelprice, rub.Note
Pioneer TK-2100/35 7300-19200 Outdoor model with basketball hoop.
MSG-01145/- 12300-14800 Children's complex with a swing "nest", double and standard.
Wooden swing-/- 390-590 Operation indoors and outdoors is possible. The frame for fixing the suspension is not included in the standard package.
double space100/41 15600-17600 Sports complex for the street.
SET 350/- 35000-44000 Gondola set
ROTATING SEE-SAW50/- 11800-18800 Swing-balancer with a central support for 360-degree rotation around the axis.

When choosing the most economical option, it is recommended to pay attention to current sales. Most wide range of offer trade enterprises in St. Petersburg and in Moscow. Inexpensively, you can buy a simple set of a seat and a rope suspension. The cost of large sets with slides, houses and other additional elements is tens of thousands of rubles.

How to make a children's swing for a summer residence with your own hands

In order not to figure out how to weld a reliable support frame at home, the nuances of other complex operations, you should choose a relatively simple collapsible design.

This variant of dimensional drawings is selected as an example. It has all the main components of products of this type. With the help of the following description, you will learn how to build an outdoor summer swing with a roof by yourself. The knowledge gained will be useful during the manufacture of a specialized design for kids in the country:

  • According to the given dimensions, the corresponding parts should be created. Non-standard elements can be ordered from a specialized workshop. Chains, hooks, fasteners are purchased at the store. Based on the drawing, you can create a list of required components.
  • Wooden planks (2) are impregnated with a deep primer, varnished. Create a protective and decorative layer on the surfaces of crossbars (21), other metal parts. This operation is not necessary if the product is already protected by galvanizing, or using other technologies in the factory.
  • You can start by assembling the seat. Corners (3) with stiffening strips (6) are connected into a strong frame. They are fastened with bolts and rivets (5). Planks (2) are fixed with screws (1).
  • The finished seat is installed in the center of the working platform. Start assembling the frame. A square base is laid out from the rods (4). Side bars (7) are attached to it. Stability is provided with the use of crossbars (21).
  • The roof support frame (18), spacer washer (17), liner (16) and rod (13) are connected in series to the upper points. These parts are supported by bolts (20) on both sides. Do not damage them, this operation is easier to perform with an assistant.
  • To fix the normal position, install the bolt (15). Struts (12) strengthen the joints.
  • The seat is suspended with steel ropes (9), rings (11) and carabiners.

After the assembly is completed, the awning is pulled, the cushions prepared in advance for the garden swing are laid. The design described here will turn out to be quite heavy, so it is better to perform all the actions directly at the installation site of the product. The described swing mounts are quite functional. But they can be improved if the upper units are installed on bearings.

The following photos show examples with comments on making special adjustments to some homemade products for a child.

For your information! Web swings are well suited for the little ones. To increase the level of safety, it is enough to increase the height of the seat walls.

Today, a large number of people have country houses or summer cottages - places where you can relax and unwind from everyday hustle and bustle. Today we will tell you how to make a metal garden swing with your own hands for your summer cottage.

This material is conditionally divided into 3 parts.

  • In the first part: the use of metal to build a swing, and why country builders prefer it. We will talk about the advantages and disadvantages of such structures, calculate the mass of planned attractions, and also talk about the types of attachment for stationary and hanging swings.
  • In the second part: we will tell you how to make an outdoor metal swing for a summer residence in the form of a bench or a sofa with your own hands, we will also give recommendations on the installation of single structures. And you will also learn how to make a swing seat from a profile pipe with your own hands, as well as a frame.
  • In the third part: a little about decorating and caring for iron swings, as well as features of the choice in the store.

Advantages and disadvantages of a profile pipe

If you understand in detail the advantages of a profile pipe, you get the following list.

  • Pipe shape optimized for fast production, which means it is very simple and easy to use.
  • Very economical material, especially when compared with reinforcing structures.
  • The stiffening ribs, which are located on the structure, greatly increase the upper limit of permissible loads.
  • The material perfectly resists mechanical damage - it is difficult to deform it with a blow.

However, along with the advantages, the swing from the profile pipe also has its drawbacks:

  • Most of the operations that can be done with a pipe do not require complex equipment. Except one - bending. It is very difficult to bend it, and all because of those very stiffeners. For this you need a special machine.
  • Carbon steel rusts easily and is easily damaged by moisture. This shortcoming can be eliminated using the galvanizing procedure, but it also greatly increases the price of the final structure.

Calculation of a profile pipe to determine the mass of a swing

When calculating the size of a swing made of metal, it is necessary to calculate its mass. This will help in the future to determine whether a foundation is needed and what loads the swing will withstand.

  • When using a square profile pipe with dimensions of 20x20 and a thickness of 1 mm, the weight of one meter of the tube will be ~ 600 g (it all depends on the steel grade).
  • A 30x30 pipe with a thickness of 1 mm has a weight of 900 g, respectively.
  • A profile pipe 40x40 with a wall thickness of 2 mm per 1 meter of length will weigh ~ 2300 gr.

Using the data provided, it is easy to calculate the approximate mass of both pipes and the frame of a future garden swing from a profile pipe. We can do this in the following way.

For example, the design uses 8.5 meters of a pipe measuring 30x30x1mm and 3 meters of a pipe measuring 50x50x2mm. Calculate the structural weight:

  1. 8.5*900=7650 gr (total pipe weight 30x30x1mm);
  2. Since the pipe 40x40x2mm weighs 2300 g, the pipe 50x50x2 has a weight, respectively, 2300 + 2300 * 0.25 = 2875 g.
  3. 3*2875=8625 gr (total pipe weight 50x50x2mm).

Appointment of a profile pipe for a swing

In order to correctly answer this question, it is necessary to explain what types of pipes are used for which parts of the swing.

  1. Round (oval) pipes. Suitable for curved designs(e.g. seats, armrests, arches).
  2. Square and rectangular pipes. They have good strength, suitable for parts that are placed on the surface (vertical racks, spacers).
  3. Flat pipes - suitable for auxiliary elements(horizontal struts).

Swing attachment types and classification

Before choosing a scheme according to which we will assemble a metal swing with our own hands, we need to decide on the methods of attaching them to the supporting structure.

There are two main types of attachments for hanging swings:

  • on eye nuts;
  • to nodes.

In the first case, you do the following:

  1. Make through holes in a horizontal beam with a drill (~ 5 mm);
  2. Insert long bolts with washers, tighten the eye nuts;
  3. Attach carabiners and chains or ropes to them.

In the second case, the sequence is:

  1. Throw the ropes over the crossbar;
  2. Making a sea knot
  3. Attach the other ends of the rope to the seat.

Hanging metal swing

Homemade swings for summer cottages made of metal are often quite small in size. These are usually small seats for one person, mostly for children. They do not need a fixed base to hang them in the yard, they only need a tree with thick enough branches or a supporting structure.


Hanging swings are most often hung on a chain or strong ropes - depending on the desire and style. At the same time, you can fix them without damaging the branch itself: wrap the chain or rope with a sliding knot, which will provide a fairly strong grip. The main thing here is to correctly calculate the thickness of the suspension itself.

Chain attachment example.

  1. Drill a large through hole along the width of the seat with a thickness of 7-9 mm (along the red line in the picture);
  2. Pull the chain through the drilled chain hole;
  3. Screw the steel bolts along the edges of the seat in such a way as to fix the chain.

Stationary metal swing

Do-it-yourself stationary garden swing from a profile pipe is a more complex option, but no less popular. Great if you need to install seats for two or three people.


For a stationary swing, in addition to the seat itself, it is necessary to make a frame from a profile pipe. This - load-bearing element the whole structure, the heaviest loads will fall on it, so you need to do it with all the attention. Mounting to a stationary frame has several varieties.


Where to install a metal swing on the site

Before you weld a swing or buy it in a store, you need to choose a place on the site, we recommend that you adhere to the following rules:

  1. The swing should be located in an open area near the house. Perfect option– 10-20 meters so that you can watch your children play;
  2. There should be no communications above the iron swing (water, power lines and other wires);
  3. There should be no roads nearby (it is best to put a fence around).

Having decided on the place, it is necessary to prepare a drawing-project of your design. We recommend that you specify all dimensions in advance - this way you will save a lot of time and resources for revisions and alterations.

Swing in the form of a bench or sofa with a metal frame

This type of swing is common among manufacturers - today on the market you will find a large number of ready-made assembled models of this type. They are distinguished by practicality and relative cheapness. Such a swing is suitable for joint gatherings in the evening after labor day or on weekends with children and loved ones.


Before purchasing materials and proceeding to self-manufacturing iron swing, check out the design features:

  • this type of metal swing for giving can be both portable and stationary;
  • the foundation of a portable structure is not required - the square at the base is the support. In case you decide to make a stationary swing, we recommend that you keep in mind the columnar foundation;
  • a canopy is often made to such structures - it can be either a polycarbonate roof or a stretched awning.

Materials and tools

To make a swing from a profile pipe with your own hands, you will need a whole list of tools and materials:

  • Round profile pipe for a frame with a diameter of 20 mm, 14170 mm (take a meter or two more with a margin);
  • 4 steel corners;
  • 2 steel arcs, each 250 mm long and 15 mm in diameter;
  • 2 wooden canvases;
  • a cable, chain or any other suspension that can withstand a load of up to 250-300 kilograms;
  • welding machine;
  • pliers;
  • hammer;
  • vise;
  • grinder or hacksaw;
  • building level;
  • roulette;
  • special paint for metal against corrosion;
  • eye screws 5x80mm, 4 pieces.
  • shackle M5, 6 pieces;
  • bolt M6x30, 4 pieces;
  • nut M6, 4 pieces;
  • spring washer M6, 4 pieces.

Step-by-step instruction


Cutting parts from profile pipes for iron street swings. For side racks, you will need pieces of 2500 mm, 4 pieces. On the crossbar you will need a piece of pipe, 2100 mm long.

We cut off the edge of the pipe at 30 degrees at the end, after which we weld them into an isosceles triangle using a welding machine.

We measure 2000 mm from the top of the uprights and weld a 1035 mm long horizontal bar to strengthen the frame. See the drawing of a garden swing made of metal, which we made for you with our own hands.

We weld a horizontal crossbar at the ends of the vertical racks. After that, the seat will be attached to it. The distance between the A-posts is 2000 mm, the crossbar protrudes 50 mm on each side.

Let's create a swing bench from a profile pipe with our own hands. We take several bars 30x30x6000 mm and shorten them. You should get segments of 1500 mm in the amount of 24 pieces. We clean them with sandpaper or a machine tool. Or you can take a bar 100x100 and fit it under required dimensions. It is not necessary to cut 30x30, you can use 20x50 and 30x70, etc.

We apply paint and varnish on the surface to prevent rotting of the wood.


We make a frame from a pipe 15 mm in diameter. We weld the segments together and attach the bars with bolts. The distance between them is 20-25mm. Along the edges, we weld eye nuts for attaching the chain (two on one side, two on the other). You can also experiment with the distance between the bars (it all depends on their size). More details on the drawing of a swing from a profile pipe.

We fasten the seat to the vertical posts of the metal swing frame. We drill through holes in the crossbar for bolts with eye nuts. We thread them and twist them. We connect the carabiners with all the eye nuts and attach the chain.

We dig 4 holes with a depth of 450mm. To do this, we use a hand iron drill.

Mixing concrete. Add cement, sand and water to the container in proportions of 1:2:3. It is best to use cement labeled as M400.

At the bottom we fall asleep a pillow of sand 100mm, after which we install the racks in the pits. We throw a few large stones for the stability of the structure, after which we fill everything with concrete. We are waiting for 3-4 days until everything dries. The design is ready

Metal single swing

Do-it-yourself single swings from pipes can be welded both stationary and portable - it all depends on who will use them and how much free space you have on the site.

Stationary swings have the greatest stability of all the listed options: children will not be able to turn them over even during the most active game. However, because of this, they have a drawback - low mobility: they cannot be removed during bad weather. Portable, of course, are not as stable, but also much more convenient than stationary ones.

The main stages of installation


To weld the swing frame from the profile, you need to take the pipe and cut it into two equal parts, each 3100 mm. Cut the edges of the vertical racks at an angle of 45 degrees. After that, it is necessary to form the letter P - weld the third to the ends of these two segments. Its edges should also be cut at an angle of 45 degrees.

The second step is the formation of a do-it-yourself metal swing structure on bearings. We need two pieces 5 centimeters long from a pipe with a diameter of 90 millimeters. Bearings are inserted into them, after which they are scalded for fixing. On the other hand, for additional fixation, a small piece of metal is welded over the pipe. A piece of pipe with a diameter of 27 millimeters will be inserted into the bearings.

Two plates are welded to a 27 mm pipe - this will be fasteners for carabiners. The bearing structure itself is fixed on the crossbar with the help of two pieces of metal. They are welded on the sides of the pipe into which they are inserted into the bearings. Important - before starting the assembly of this part, apply grease to the bearing and periodically moisten it with water. If this is not done, then the material will heat up from welding, the steel will expand and the structure will be damaged.

After the assembly of the frame is over, it is necessary to dig two holes under it, insert the ends of the pipe there and carefully concrete everything. After the concrete has dried, it is necessary to weld stabilizing slopes from the remains of the pipes.

A frame is welded under the seat of a garden metal swing from a prepared profile pipe. We use a welding machine. At the edges we fasten the eye nuts (marked with green dots).

We fasten the carabiners to the eye nuts and connect everything with a steel chain.

How to make metal swing seats

Such double swing from a profile pipe can often be found on playgrounds. First, a few words about the advantages and disadvantages.


Large metal outdoor swing

Advantages:

  • strength is the most important advantage of such a swing. Stiffeners greatly increase the bending resistance of the structure;
  • profitability - profile pipes are easy to manufacture, which helps to significantly reduce the cost of all materials;
  • durability.

Flaws:

  • careful care - if you do not galvanize the profile pipes and do not cover them with protective compounds, then after a while rust will appear;
  • the complexity of bending pipes - this may require additional equipment.

How to weld a frame for a swing made of metal with your own hands to the country house, prepare the foundation and hang the seats, we have repeatedly told, so now we will tell you which seat is suitable for such a design and its dimensions.

The following parts are needed: 3x1600m; 3x880mm; 2x200mm; 5x500mm. More details on the drawing.

A long segment of 1600 mm is installed, 3 short ones of 500 mm each are welded to it - the letter Sh is obtained. Another long segment is welded from the free ends. The back is formed in the same way. Everything is fixed with corners along the edges of each part of the structure and welded together at an angle of 90 degrees. Two pieces of board are attached to the structure with bolts.

To make the back more comfortable for sitting, you need to set it at an angle of 115 degrees. To do this, you need to make an appropriate section at the ends of 880 mm segments for the back.

How to make a garden swing frame - video

To independently create a garden swing frame from a professional pipe, we recommend that you follow the algorithm of actions, as in the video below.

Decorating and caring for metal swings

In order for the swing from the pipes that you made with your own hands to last as long as possible, we recommend that you pre-decorate them and, after every six months or a year, tint them with special paint for metal.

Here's what else you can cover the metal with:

  • rust solvent;
  • paint-enamel for metal;
  • primer for surface treatment;
  • paint with the addition of metal powder (yellow).

After the building is completed, you can decorate the structure:

  1. Sew seat covers. For them, a dense fabric that is not afraid of contact with moisture is suitable.
  2. Paint the side racks with patterns or drawings. To do this, you need a stencil with patterns or figures, paint for metal and a brush (or sponge). Attach the stencil to the walls. Take a sponge and wet it with paint. Blot the stencil and remove it. Repeat the procedure several times.
  3. Decorate the area next to a homemade iron swing for the street. Plant flowers, build a small decorative fence, arrange the sculptures.

How to choose a metal swing

When buying a metal swing for giving in a store, you should pay attention to:

  • size and dimensions. As a rule, the swing has a width of 2-2.5, which is universal and allows you to easily install it on any type of site. If you need unique dimensions, it is best to make to order.
  • Manufacturing material. Decide in advance what kind of material you want to see. The classic version is made of metal and wood, but there are also modern materials, such as high-strength plastic, steel bars.
  • Price. This is an important factor, since on the market you can find absolutely any model for a different budget.

We offer to consider several models of single and double metal swings, which are now popular on the market:

ModelPriceManufacturerMain pros and features
8 990 rubChina1.9x1.13x1.8mup to 300 kg● double swing;

● soft seat;

● fabric canopy.
3 710rRussia1.37×1.42×1.8mup to 90 kg● single swing;

● product bases are installed in concrete;

● wooden seat with chain attachment.
6 890 rubRussia3x1.2mup to 100 kg● double swing;

● wooden seat;

● fastening - steel chain;

● without foundation
12 990 rubRussia2.9x1.55x2mup to 250kg in total● double swing;

● seat material - plastic;

● suitable for children 3-10 years old;

● production material - steel

In conclusion, I would like to say that regardless of whether you want to assemble a metal swing yourself or purchase ready product, you need to look first of all at their quality and ease of use, choose only the best. We hope that now you know how to do it. Good luck!

according to common public opinion swings are used only for fun and only by children. Unfortunately, this opinion is erroneous, since a swing can become a wonderful element of the decor of a summer cottage and make up for an existing one. design solution generally. Before you make a swing in the country, you need to familiarize yourself with the possible options for their construction in order to choose the most appropriate design and functionality, and then proceed to the manufacture of the entire structure. About this and much more in the article below. Happy studying.

Usually, swings are made from 2 materials. It's either metal, or wood, or a combination of both. Seats for swings can be made from almost any materials at hand: ropes, old chair bases, chairs, plastic, and the like.

The main criterion for swings is their comfort and safety. There are also options additional add-ons over street swings in the form of all kinds of canopies made of wood, tarpaulin, fabrics, and so on. A canopy is needed to protect against various climatic influences.

swing options

Before erecting a structure, you should think about the purpose of its use, whether you will use it personally, or whether it will be a children's swing for a summer residence. Also think about the location of the swing on suburban area, about their dimensions and constructability, depending on the climatic zone in which your summer cottage is located (not in every area the swing can winter on the street). In addition to these requirements, you also need to think about the overall design of the site and the swing that will fit into it.

According to the variations in the location, the swing is divided into mobile and stationary. A collapsible swing, that is, mobile, can include in its design a special frame that is mounted directly on the ground. You can make several types of swings with your own hands, the main of which are: hammocks (1), sofas (2) and balancers (3).

There is also a huge amount custom designs, bright approximately which are:

  1. Chip-shaped swing;
  2. suspended swing in a rack, made in the shape of the letter L;
  3. in the form of children's structures (boats, birds, airplanes);
  4. metal swing with a hoop-shaped seat and decor made of forged elements;
  5. swings for children with disabilities.

The manufacture of a hanging swing provides for the organization of only the seat and does not provide for the construction of a frame. The seat is attached to tree plantations in a summer cottage or to beams using chains, ropes, and other devices that can withstand the required weight. Of course, you can also build a frame, but for this you need to have the skills to work with welding machine, for example, if the frame is metal. Therefore, the easiest way is to attach the swing to the already finished structures, such as a tree, which is available in almost every site.

From old tires

The execution of such a swing with your own hands may include several options for their implementation:

From timber or board

To make such a home-made wooden swing for a summer residence, which has a familiar look for everyone, you just need to make holes along the edges of the board or timber and insert ropes, a chain or other fastening element into them.

Instead of a beam, it is possible to use the base of the chair. In this case, it is necessary to remove the legs and wrap with a rope, as indicated in the image.

From the hoop

An ordinary hoop made of aluminum or steel is wrapped with a rope so as to form a weave of a certain shape, for example, in the form of a web. It is advisable to trim the entire hoop around the perimeter with foam rubber, putting an additional layer of fabric on top. To secure the swing, metal rings, ropes, chains or other fastening devices are used. When mounting a swing from a hoop, it must be done at least at 4 points along the perimeter of the hoop.

A special version of the execution of such a swing from a hoop can be a swing with a basin placed inside the hoop.

Hoop and basin swing

Your safety depends on how firmly the ropes are attached to the base of the hoop.

The design can be easily upgraded or altered depending on the needs of the owner. For example, you can make a flower bed out of it.

from tarpaulin

For organization, you will need metal triangles, fastening materials in the form of chains or ropes, and materials for the saddle in the form of a tarp. The tarpaulin is folded several times so as to cover the metal triangle, after which the resulting structure is fastened with rivets. Then the swing must be hung up and used for its intended purpose. Tarpaulin swing

From pallets

To make such a swing, the same principles are used as for organizing the most ordinary swing. With the help of a rope or other fastening material, the swing is tied to the base of the prepared support column.

Pallet swing

If you want to get a more comfortable, but at the same time complex design, then you can combine several pallets - you get a swing with a back.

From snowboard

By attaching ropes to supports, you can tie a snowboard to them. If you think that this construction is not strong enough, you have a mistaken opinion, as this board is designed to withstand huge loads.

Snowboard swing

The equivalent of a snowboard is a skateboard. If there are still wheels on it, this will help to secure the rope and keep it from slipping off.

Skateboard swing

Swing on racks

To make such a swing for a summer residence with your own hands, you will need several elements:

  1. Durable rope;
  2. Tree;
  3. Plywood or chipboard along with a fence to organize the saddle;
  4. Fasteners - rope or chain.

To fix the structure, it is necessary to use sufficiently powerful zinc bolts. Ordinary nails or screws cannot provide adequate security.

Anchor hook fastening scheme

You also need to use an antiseptic - it will warn the tree from the influence of weather conditions on it.

The swing is fastened by hanging them on a pre-prepared beam or branch. To do supporting structure, wooden bars are usually used. The racks of the bench, the ends of which are buried in the ground, are usually treated with bitumen for a long service life. Since the fastening of the racks must be strong, a hole of approximately 1 meter is dug. The bottom of the pit, after the rack is established, is covered with 20-30 centimeters of rubble and sand, and poured with concrete from above.

Swing pattern

With enough time and desire, you can make pillars out of concrete, and then attach a wooden block to them with large anchor bolts. If you decide to concrete pillars, then to attach a tree to them, you need to use a material that provides moisture insulation.

For additional stability and safety, braces can be attached to the uprights, the installation of which should be carried out at an angle of 45 degrees.

Such garden swings for giving also require endurance necessary conditions in their manufacture and the process takes place in several stages.

Necessary:

  1. Make clubs in the form of an arc, designed to secure the base of the entire bench. It is necessary to cut 6 such arcs, using a tree (board and plywood) different thickness(for a board - 22 mm, for plywood - 12 mm).

    Support bars made of plywood

  2. Using the resulting plywood blanks, we make the core. To do this, we apply arcs of plywood to the tree, circle them with a pencil and cut out the shape we need from the tree. It is also necessary to make cutouts into which the rope will be threaded. The place for cutouts is the outer layers of the blanks located on the edge.

    The core of the tree on the prepared arcs

  3. We glue the plywood blanks (arcs) together with the board using a special glue that is not susceptible to water influence. We fasten the support with clamps, which can be removed only after the glue has completely dried.
  4. We process the edges of the resulting structure with a special grinding machine to give the shape of a circle.

    Sanding

  5. We make circles of a certain thickness from the board, which will serve as rope holders. If there is a special nozzle on the drill for these purposes, then it is advisable to use it.

    Circles for fastening ropes

  6. All previously made elements require treatment with a weatherproof paint or primer mixture.

    Painting

  7. We screw the rope holders into pre-cut wooden circles and fasten them with the same screwing to the supports along the edges on both sides, after which we cover the wooden bases with paint.

    rope holders

  8. We make a saddle, the initial stage of manufacturing of which will be the alignment of the picket fence.

    Picket fence alignment

  9. Holes are made in each constituent element of the saddle (in the slats). Holes should be neatly decorated - arranged in one row. A corner or blank made of plywood with pre-drilled holes in them will help with this - a kind of template.

    Drilling holes in the fence

  10. Using self-tapping screws, we fasten the boards to the previously made supports. To ensure that the distance between the screwed boards is the same, special boards can be placed under them. Hole drilling
  11. We fasten the armrests, also made of planks, to the end of the support using self-tapping screws, after placing pre-prepared wooden circles between them and the support.

    Armrest attachment

  12. We put the rope into the hole of the metal holder, which was previously attached to the base of the swing. We tightly tie the rope and additionally fix it with wire.

    Finished swing

  13. Using a knife or scissors, we get rid of the excess length of the rope.
  14. We push the rope into the pre-made hole in the armrests and also tie it into a knot on the other side of the arcuate bar.
  15. We hang the swing on a beam or tree, tying it with a rope branch.

The first children's swing for giving was made, although they are used not only by children, but also by adults.

DIY metal swing

Metal swing on support posts

Do-it-yourself swings for giving with your own hands can be done, but not all options may suit you if you do not have experience in working with some tools, for example, with a welding machine. It is better to first practice on simpler options, for example, to make a wooden swing for a summer residence from a board or a bar. Also, the option from a skateboard is quite suitable if you have one and is no longer used for its intended purpose.

Well, then you can already try to do more complex structures, for example, a wooden swing like a bench or sofa, as described above. You can ask your neighbors or people who have already been involved in a similar process. This will keep you safe from creating an unsafe construct, which is one of the the most important factor successful swing manufacturing. Appearance is far from the main thing, safety is above all.

on 06.05.2017 1,559 Views

A cushion chair for such a swing can be easily sewn from an old bedspread, however, it will not be as durable as, for example, wooden, and besides, it is better to protect it from moisture.

We go to the country to rest and work. We dream of lying in a hammock, drinking tea in the fresh air, but this is not enough for a child. Its energy requires intelligent use, and it is in our power to create the right conditions for this. simple and practical way- buy or build a swing with your own hands. So let's talk about what swings are, from what and how to build them.

  • Material
  • Building a wooden swing
  • Building together

    • A seat woven from a wicker with a back will provide children comfortable rest on the swing

    Children's outdoor swing: types

    When choosing a children's swing for outdoor summer cottages, parents are required to check them for absolute safety for the child. Consider what manufacturers offer us for our treasures.

    For the safety of the swing seat, it is necessary to provide a horizontal bar in front of the chair, which will provide protection for your child

    First of all, the swing is divided according to the material of manufacture. They can be wood, metal or plastic.

    Children's wooden swing for giving environmentally friendly, durable, easy to assemble and beautiful appearance. Impregnation of wood with a special composition increases the service life of products.

    An old skateboard is also suitable as a swing seat, because its board is very durable and hardy.

    You will have to tinker with such a wooden swing-airplane, but the result is worth it, your child will feel like a real pilot

    metal swings are among the most reliable and durable models. They can be forged, collapsible, welded. They weigh a lot, but this is justified by their strength and stability of the installation.

    Hanging swing, the seat of which is made of metal rings, will become a real decoration of your yard

    For a children's swing, it is possible to use any options as a seat, for example, part of a ski lift

    Plastic designed for the little ones. Light and bright, they are great for babies under 5 years old, but they are afraid winter frosts and bloom under the sun.

    For babies, a fabric seat with a perimeter enclosing structure will be comfortable and safe, where the child will feel confident

    Swings are also distinguished by the type of construction: suspended and frame.

    Swing frame type in the form of a red wooden sofa - bright accent for your site

    Frame, of course, it is preferable for children, because they are highly stable, they can be freely moved to different parts of the site, they are durable and safe enough to use.

    A swing that is simple in shape can be made special - a little imagination and boring seats have turned into bright little animals that will be much more interesting for your children to play with.

    Suspended Models are simple, do not require special skills to assemble. To equip them, you need a carrier beam, a strong rope and a board for the seat. It is desirable that she had a back.

    By choosing bright colors for the swing, you can even more cheer up the children.

    Car tires can be great material for children's swings if you apply fun coloring to them.

    Swing chairs Designed for kids up to 3 years old. They are usually low, with a soft back and a seat in the form of a deck chair.

    Deckchair with soft seats- a safe swing option for a small child

    All these models can be purchased in stores, but if you decide not to spend money and build a children's swing for a summer residence with your own hands, we will help you.

    Material

    Of the materials for structures with supports, there are two options: metal and wood. Unfortunately, a children's metal swing for a summer residence will require special skills from you. If you are not a blacksmith or a welder, building a metal frame will be problematic. Yes, and pipes for supports will also have to be looked for.

    To make such a swing you will need quite a bit: wooden chair and chains - and a unique decor for your yard is ready

    Children's swings are not particularly demanding on design. The main thing for children is movement, and a rope suspended from a thick tree branch with a board for sitting can also provide it.

    The best solution that any parent can do is to build a wooden swing.

    Building a wooden swing

    The simplest design is a children's hanging swing for giving without a frame. It's great if you have a large tree with a low thick bough on or near the site. They threw two ropes over it, built a seat from improvised means - and the swing is ready. As a seat, you can use tires traditionally loved by summer residents, high chair, an abandoned skateboard, a piece of board, an old ice cube. In general, everything that, in your opinion, is suitable for a comfortable ride for a child.

    The easiest way to organize a swing is to use a tree branch as a base

    In such a round swing on a soft pillow, tied to the base, so as not to “fly away”, it will be pleasant to spend time not only for children, but also for adults

    For the construction of a frame swing, we first determine the place. It should be close to the house, but away from the fence and trees. Then we need lumber and tools. Choose conifers, but others are possible, the main thing is that the tree is dry, durable, without defects. We carry out preliminary processing of wooden parts: we clean, grind, process with a special compound to increase moisture resistance. For the swing we need:

    The beautiful and durable design of the swing chair will not leave indifferent not only children, but also adults

    • two pillars
    • rope (about 6 m)
    • crossbar
    • ring-shaped pendants (hooks are possible)
    • fasteners

      • For the stability of the frame, the side supports can be made in the shape of the letter "L"

      Advice! Please note that nails are not suitable for attaching swing parts, it is better to take bolts.

      With your own hands you can build such a hanging swing-bed, where your children will play

      From the tool we take a shovel, hammer, drill, tape measure, planer, grinder, paint and brushes. Well, the springboard for work is ready. Let's move on to step-by-step design.

      To create such a wonderful swing, you only need an old chair, a rope and bright paint.

      • We carefully clean the place under the swing from debris and level the site.
      • We dig two holes for poles to a depth of 90-100 cm.
      • Before installing the pillars in the pits, we will process the lower part, about 50 cm, with tar. This is how we keep them from rotting.
      • We fasten the crossbar to the posts. It is desirable that the diameter of the crossbar coincide with the diameter of the pillars.
      • We mount metal parts using special fasteners. They can be purchased at the store.
      • We process sharp corners with a grinder.
      • We fasten ropes or chains to the crossbar, checking their reliability with their own weight.
      • We tie the ends of the ropes to the seat, having previously drilled holes in it.

        • U-shaped children's outdoor swings with greenery at the uprights provide shade and aesthetics for this simple design.

        We got the letter "P".

        Advice!For kids, it is better to attach seatbnot two ropes, but four. To do this, take two lengths for each rope, fold in half, and thread the ends into the seat.

        If this option bothers you, you can build a more stable structure by taking four pillars for the frame and placing them in the form of a block letter "L". The sequence of work is almost the same, only you will need to dig four holes, cut off the tops of the pillars at an angle, connect them with metal parts. Between the pillars, below, at a height of about 50 cm, stiffeners should be nailed on both sides of the swing. This design creates opportunities for creating a real children's summer cottage. By increasing the distance between the posts, you can nail a long bar and add a rope or climbing ladder to the swing.

        Children's wooden swings for summer cottages are environmentally friendly, durable and easy to assemble

        Swing-bed for rest and entertainment of a child, made of a wooden pallet

        Building together

        Now you know how to make a children's swing in a wooden cottage on your own.

        Original children's bright swing, the seat of which is made of fabric with rubber bands

        A funny swing in the form of a deer will bring joy to every child

        If the first experience does not disappoint you, do not stop there. The child is growing, or maybe you are planning the birth of a second baby, and swings alone will not be enough. Build children's swings and slides in the country together with neighbors in the area or with friends. Maybe among them there will be metal craftsmen, and then you will get an eternal swing for children of any age.

        Multi-colored swing baskets will not only bring joy to children, but also noticeably transform your yard