What types of decorative corners are there, methods of application, installation rules and examples of use in the interior.

Decorative wall corners

One of the most problematic areas in interior decoration are the outer corners.

It is quite difficult to paste over them with high quality, often the wallpaper rises at the corners, the corner is easily damaged by hitting a solid large object when moving furniture or carrying it.

Decorative corners help to solve these problems.

The corner protects the surface from mechanical damage, allows you to hide some flaws in the finish, arrange the transition from one material to another, close the ends of tiles or panels.

Where applicable

There are many options for using corners in the interior. They can be used to decorate both external and internal wall corners. Some difficulties arise when finishing corners other than 90 °, this requires special, so-called. folding corners. To finish the curved surface of the corner, flexible, “arched”, corner profiles are used.

The most common ways to use decorative corners:

• Adjacency of a window slope to a wall. It is extremely rare to see a slope, the near edge of which is not closed by a corner. Their use in this case protects the edge of the slope from damage and prevents the wallpaper from peeling off, which quite often occurs at external corners. In addition to the technical, the angular profile also carries an aesthetic load. The use of a white corner completes the window opening. A profile that contrasts with the slope and wall decoration can create the desired color accent or become an independent original interior detail.
• Decoration of the doorway. Corners can also be used in the design of the doorway, when the thickness of the wall is greater than the width of the door frame. In that case, additional strips are installed to the door, the adjoining of the end of which to the wall is closed with a corner element matched to the color of the door.
• Protection of external corners of walls, columns, ledges. In this case, the corner protects the wall finish from mechanical damage, such as accidental impact with a heavy oversized object. It helps to preserve the finish and layers of putty and plaster. Also, the use of a corner profile simplifies the cleaning of the room. Often, handprints remain on the outer corners, which are easier to remove from plastic than from wallpaper. Properly selected contrasting corners allow you to avoid dullness and monotony of the interior.
• Formation of openings. In interior design, instead of doors, they often leave just an opening, for example, between the kitchen and the living room. The corners serve to decorate and protect the corners.
• External corners of walls tiled with tiles or wall panels. The ends of the tiles are closed with an angular profile, because. they differ in color from the front surface of the tile. If the tile is cut to size, and the cut edge is not sanded, it is easy to cut yourself on such an angle. When mounting the corner on the panel, they close the corner joint. The use of a special corner profile for these purposes is not always convenient, then decorative corners are used.
• Decorating and protecting the corners of gypsum board structures, such as racks or shelves.
• Decorating furniture, framing mirrors. In addition to decorative functions, it protects the edges from chipping.

Varieties according to the materials of manufacture

Corner profiles are made of various synthetic materials, MDF, wood, metal. Its appearance, technical characteristics and scope depend on the material of the corner.

metal

Made from aluminium, stainless steel, brass. Steel and brass products are polished and uncoated, while aluminum products are divided into polished, anodized and with a decorative coating, usually wood-like, but can also be painted in various colors. They are mainly used in the manufacture of furniture, less often in interior decoration. To protect the ends of the furniture boards, they are covered with a corner with different shelves, one of the shelves of which completely covers the end, the second goes slightly onto the plane. Unpainted profiles are suitable for framing mirrors and glass-covered pictures or posters.

Metal corners can be mounted on walls as a basis for a light false ceiling of the Armstrong type or PVC panels. Aluminum products are attached to the steps as anti-slip pads and edge protection from chips.

Wooden finishing

They are made from various types of wood, including valuable ones. Wooden corners are used to complete the decoration in rooms made of wood, for example, wall cladding with a block house or clapboard.

With their help, the ends of the boards are closed, both on the outer and inner corners. Also, these products are suitable for decorating painted or wallpapered walls. In this case, they need to be painted or varnished. Wooden corners can only be used at strictly right angles, because. they are fragile and with the slightest effort to bend or unbend them can crack.

Transparent silicone corners for wallpaper

If you need to protect the corner and keep the pattern of the wallpaper, stick a silicone corner profile. This material is quite soft and is well suited for rooms where small children are often present, because. reduces the risk of a child being injured by hitting a corner. The relative disadvantage of these products is that due to their transparency, they do not hide flaws in the finish.

Polyurethane

They are smooth, with a relief ornament and profiled. Smooth ones are similar to ordinary PVC corner profiles, differing from them in a larger shelf thickness. On the shelves often reproduce a three-dimensional ornament.

For use in classic interiors, polyurethane profiles of a complex section are produced that imitate gypsum stucco molding. On sale are white and painted in various colors, including imitating wood, you can also find painted in several colors, for example, a smooth part under a tree, and an ornament under gold. Due to the complex shape, they require great care in installation. Paints used in decoration fit well on polyurethane.

Plastic colored

Made from PVC. Visually imitate wood, metal surface or simply painted in one shade. The palette of monochrome corners contains approximately 30 shades. If necessary, in the desired shade, you can use special paints white profile. It is used everywhere in decoration, second only to white in popularity. For the design of arches and other curved surfaces, there is a special type of corners - flexible or arched.

MDF corners

They are 2 strips of MDF glued together with a film. The film is applied from the front side, the pattern repeats the pattern on MDF panels. Due to the fact that the shelves are movably fixed relative to each other, the same profile can be used on surfaces mated at different, internal and external, sharp, right and obtuse angles. Usually used when lining walls with MDF panels, but can also be used instead of any other type of corners.

MDF corners are undesirable to operate in rooms with high humidity.

Corner decor in an apartment: how to decorate a room with corners

The options for using decorative corners in the interior design of a room depend on many factors:

• surface material. A white plastic corner glued to the corner of walls lined with clapboard will look ridiculous.
• Finish colors. In no case should a red element be placed in a room designed in pastel colors.
• General stylistic solution of the interior. A polished stainless steel profile will not fit into a classic interior, a polyurethane, “stuccoed” profile, not suitable for high-tech style.
• Purpose of the premises. In the nursery, silicone corners are perfect. They will keep the corners intact and help protect the child from injury.

Design options for wallpaper

To complete the finish after wallpapering, a profile from any of the above materials can be used. The main criterion for choosing a corner will be its color. The choice of color can be approached in different ways. If the joining walls are of approximately the same shade, you can match the product to the color of the walls, if different - to the color of the wall that is more often looked at. For example, when finishing the corner between the room and the hallway, it is more logical to choose a profile to match the color of the room.

As one of the finishing options - decorating with a wooden corner, tinted in the color of the doors or the floor with the help of an impregnation stain and varnished. For the same purposes, products made of MDF and PVC, decorated under a tree, are suitable. When decorating a strict laconic interior, metal corners will look good.

The solution for the corners on the slopes: the better to close the corners in the apartment

To complete the finishing of the slopes, corners are used in the color of the slope, almost always white. Often, a sandwich panel serves as a material for slopes, therefore, so that the material does not differ much, PVC corner profiles are used. The width of the shelf is chosen such that it covers the end of the panel or plasterboard. If there are any defects in the finish near the window opening, for example, unevenly cut wallpaper, the corner is chosen so wide that these errors are covered.

The angle between the wall and the slope is usually more than 90 °, in order for the corner to lie flat, it should be slightly “unbent” - put on a flat surface or a pipe of large diameter and lightly press with your hands, moving along the corner.

In the cold season, the profile must warm up to room temperature before work.

Option for decor under the wallpaper

For walls pasted over with wallpaper, an option with wallpapering a corner may be suitable. For these purposes, profiles made of PVC, MDF, wood or smooth polyurethane are suitable. The profile should be of a light shade, because dark can come out from under the wallpaper. Wallpaper is glued on it, the glue is allowed to dry, then, not earlier than the next day, it is mounted on the wall. Wallpaper on the corner should be glued in one piece, of such a size that the wallpaper goes to the inside of the shelves.

How decorative corners are attached

For the installation of an angular profile, various adhesives are usually used; much less often, metal and wooden parts are mechanically fixed using self-tapping screws or nails.

What to glue plastic

For fixing PVC corners are used:

• "liquid Nails";
• acrylic sealant;
• silicone sealant.

When using sealants, the profiles must be fixed for 12 hours after gluing with masking tape. The best result is given by liquid nails, some brands of this glue do not require fixation for the drying time. As a rule, such glue must be applied to one of the surfaces, pressed on the second, then removed, allowed to dry, and then firmly pressed on the part to be glued.

For the installation of polyurethane products, you can also use liquid nails or special glue.

Finishing wooden corners in the apartment

The surface of wooden corners must be protected with varnish or paint. The varnish will allow you to preserve the texture of the wood, the paint applied in a thick layer will hide it. If you need to give the tree some shade, while maintaining the texture, you should use a wood stain or tinting impregnation for wood.

Fasten wooden elements with liquid nails, wood glue or PVA. It can also be attached to finishing nails.

When hammering a nail, the distance from the edge of the part to the nail should be more than 10 of its diameters.

How to stick a plastic corner on the wallpaper

The plastic corner is glued to the wallpaper using the same adhesives as to any other surfaces, i.e. liquid nails or sealants. It is important that the wallpaper at the place of installation is well glued to the wall, the wallpaper glue is dry. It is best to wait a few days after wallpapering and then decorate with corners.

How much dries

The drying time of the glue is indicated on the packaging, and rarely exceeds 12 hours. When sticking to silicone or acrylic sealant, it is desirable to keep the elements fixed for a day.

Decorative corners allow you to solve many tasks for decorating a room. They are inexpensive and relatively easy to assemble and dismantle, so it is quite possible to experiment if desired.

Useful video

In an apartment, protruding wall elements are the first to receive mechanical damage. They get scratches under the influence of various objects. To maintain an attractive appearance for a long time and protect arches, openings and other important sections of the wall from destruction, plastic corners are used. They are available in a wide range of shades. You can choose bright decorative elements or give preference to transparent models.

How to protect corners

The profile allows you to hide any kind of defects underneath. The walls take on clear lines. Any kind of blows fall on these protective elements. Thanks to this, the finishing materials of the walls retain their visual appeal for a longer time. It is possible to avoid repairs, at least for the next few years.

According to the scope of application, plastic corners are usually divided into:

The corners are able to protect the wallpaper from peeling. It is possible to select corners in appearance, depending on the features of the interior. For example, if the walls are sheathed with clapboard or board, you can install products on them with imitation of various types of wood. The end part of the material receives protection from moisture and dust.

For the manufacture of profiles for walls use:

• polyvinyl chloride;
• wood fiber material - MDF;
• polyurethane;
• aluminum in alloys and in pure form.

In the manufacture of plastic corners, special paint is also used. It provides the brightness of the corner, protects them from fading in the direct rays of the sun.

Finishing arched openings and corners

Plastic profiles used in the decoration of arched openings are characterized by flexibility and

the presence of an extensive range of sizes. You can stick them on openings with smooth lines without making cuts. There are colored decorative models. It is advisable to install models one tone darker than the paint on the wall or wallpaper. The arch line becomes clearer, thus emphasizing the interior and its style.

If the floor in the room was lined with wooden boards or laminate, decorative arched profiles with wood imitation are suitable for it. To protect the corners, there are also laminated products on the market.

The width of colored plastic elements is selected in accordance with the following parameters:

• arch width;
• room dimensions;
• the thickness of the wall on which there is an opening;
• ceiling height.

The recommended corner width increases as the parameters increase. In the presence of large interior elements, a narrow decorative wall corner can simply get lost. The wide one will look unnatural if it is placed in a small hallway.

The length of the arched corners does not exceed 3 m. It is enough to take one finished strip to carry out the finishing. Over time, the joints will begin to protrude, so it is important to initially lay them symmetrically.

The upper arc must be glued, starting from the central part of the arch. After that, you need to hold it in both directions. Following this, it is important to dock on the sides. Then the ends must be cleaned and glued.

Colored corners for tiles are made of aluminum, as well as its alloys. Equip a coating on it and polish it to a mirror finish. Lacquered or laminated on top. Thanks to this technology, the protrusions receive reliable protection. The decorative characteristics of the room are improved.

On one side of the profile there is a perforated strip equipped with cuts. Lay on the surface of the wall or on the steps. The opposite side is decorative. On the opposite side, it has a small internal ledge. The side end of the tile is inserted here when the corners are laid. It is important that it fits tightly.

Tiled profile is intended not only for decorative design. It makes surfaces smooth during finishing work. Three-sided elements are provided for protruding corners. They allow you to close connections in three planes. They are placed at the junction of finishing profiles located at a right angle.

These products have two sides. One of them is narrow. The design fits snugly in those places where the frame is joined to the wall. If the corner is made of MDF, it is better to put it outside.

A good solution would be to use them for doors, windows, loggias and balconies. The flashings are able to reliably close the mounting foam, protecting it from moisture and sunlight. Their decorative qualities are excellent. When facing slopes, they are not a mandatory component. You can use putty with further coloring and sealant.

Bathroom corner

PVC corners designed to seal joints in the bathroom are usually designed in white light. You can also use color options if the bathroom is decorated in a modern design. Corner ability to protect walls from moisture. Also, its use serves as a good prevention of the fungus. Plastic corners in various shades are used to protect both convex and concave corners of walls, washbasins, showers and installations. There are special PVC borders for installation under tiles.

Profiles for external and internal corners

Perforated PVC profiles are used to level corners when finishing with drywall or ordinary plaster. It is fixed directly on the solution, which is applied to the finishing sheets. It turns out that they take on the function of beacons. They also reinforce the walls.

For outdoor work, it is better to use metal products. Plastic corners can be used when it comes to faking oblique corners. They are able to bend and take the shape of the surface on which they are fixed.

For skirting boards and ceilings

As soon as the false ceiling frame is closed with PVC film or drywall, additional finishing of the ledge must be carried out. In order for the skirting boards to better adhere to the surface, concave elements are used. They can be of various colors and match the appearance of the cladding. Skirting boards are designed for maximum adhesion to the wall. But sometimes it happens that wires or pipes of a warm floor are located behind them. Therefore, it is necessary to leave a slight gap for the expansion of linoleum and laminate.

You can use for this purpose a profile of the same shade as the plinth. The corner must be fixed to the opposite surface, allowing the material to move freely in case of deformation. For finishing corners when working with multi-level ceilings, polyurethane profiles are used. They have sides 10 and 15 mm long. These products are flexible, easily follow the shape of the protrusion. In most cases, white models are in demand. The profile is not a mandatory element for fastening the protrusions to the floor. It is used only when necessary..

Corners, regardless of the room where their capitals are, are internal and external. The inner corners are hard to reach, but the outer corners are almost always open. For this reason, they suffer more often. They are scratched by pets. Often, when moving furniture and household appliances through the doors, scratches form on them.

The most commonly used materials for finishing corners are:

Plastic corners hold a confident leadership because they:

• presented in a wide range of shades;
• quite flexible and can adapt to any surface.

Installation of plastic corners is carried out only after all other finishing work has been completed. Fix them on the walls with mounting glue for plastic products. The length of the corners reaches 2.5 m. The width varies, so the profiles can be both narrow and wide.

To choose a corner in width correctly, it is necessary to measure the curvature of the corner. If this indicator is large, it is better to take profiles of a larger width. Beginners in the field of finishing work can recommend the corners of medium width.

The algorithm for fixing a plastic corner on the wall surface is as follows:

1. Measure the deviations of the angle by the building level.
2. Knead the solution based on the dry putty mixture to the desired consistency.
3. The finished mixture is applied with a conventional spatula, leveled with an angular tool so that the corner takes on a rectangular shape.
4. As soon as the corner dries completely, a perforated PVC corner is applied and covered with a layer of finishing putty.
5. After the material has completely dried, the surface is polished using an abrasive mesh.

PVC corners are always installed on a pre-prepared surface. If necessary, remove the old wallpaper with a drywall knife, remove the paint layer.

Further algorithm of actions:

1. Apply glue to the inner surface of the corner with a distance of 30 to 50 mm. This should be done as if a dotted line is being drawn.
2. After some time, the adhesive acquires optimal viscosity. About what kind of consistency is desirable in this case, you can read in the instructions for the glue. These indicators are individual, depending on the manufacturer.
3. A plastic profile is applied to the surface of the corner and fixed on top with masking tape.
4. To fix the corners, you can also use liquid nails or colorless silicone.

Styrofoam corners

Expanded polystyrene is a non-combustible material. Corners made from it have the following advantages:

• do not remove dirt;
• do not absorb moisture.

These products can be used in rooms with different temperature conditions. Such profiles can be painted. They are created by pressing and produced in various forms.

The use of polystyrene foam corners in the decoration can be considered justified if the apartment has a low permeability of residents. Such decorative elements not only protect the corners, but also do an excellent job of aesthetic function. They are fixed with a special glue, as well as conventional acrylic sealant.

wooden models

Wood products also have a number of advantages:

• decorative appearance;
• environmental friendliness;
• the possibility of carving.

• do not use wooden corners in rooms with high humidity;
• if there are regular temperature changes in the room, the use of wooden corners is not recommended.

decorative stone

Recently, stone has been increasingly used in interior decoration.. This material looks best when arranging external corners. If they have significant deviations from the geometric shape, then the stone will look especially appropriate. After all, thanks to this, you do not have to deal with the alignment of corners and walls.

Before laying decorative stone, it is necessary to prepare the surface. It should be cleaned of dust, dirt, old finish coating and primed. If the surface is too dry, it must be moistened. This ensures better absorption of the adhesive into the structure of the working wall.

First, the glue is diluted according to the instructions. It retains its properties for 2 hours. It is better to cook it in a plastic container using a drill mixer with nozzles.

After mixing, the glue is left for a few minutes. Mix thoroughly. At least 6 kg of solution is usually required per square meter of area.

The stone is pressed against the surface with force. After that, the building level checks the correctness of its installation. The stone is laid in three rows and left for a while. The glue dries after 2 hours. If you do not withstand this period, the laying of subsequent rows will turn out to be fragile, and the structure will collapse under its own weight.

Many designers prefer not to leave the corners in the apartment raw and add unusual solutions to the interior for this part of the apartment. For others, the decoration can serve as protection if there are animals or small children in the house. Fragile corner wall upholstery requires attention and additional protection. Therefore, this article addresses the question of how to arrange the corners of the walls in the apartment, there are also photo examples.

One of the most problematic areas in interior decoration are the outer corners.

In what cases is it necessary to finish the corners in the apartment?

There can be many reasons for using such a building material. At the same time, each one has a different result of work. But most often this is due to the need to align the corners in the apartment. Unfortunately, builders often encounter such an oversight and have to carry out an additional stage of repair to make the room visually complete.

Decorative corners help to solve these problems.

To make the correct geometric shape, it is necessary to prepare the work surface. For this, the previous coating is removed: wallpaper, whitewash, plaster. Next, the builders carry out the treatment in the form of spraying with an antiseptic and cover with a new layer of primer.

The corner protects the surface from mechanical damage, allows you to hide some flaws in the finish, arrange the transition from one material to another, close the ends of tiles or panels.

Using a special corner, which is sold in every professional hardware store, the necessary shape is set at the corners of the walls. At the same time, time is taken to measure the deviation and evenness of the resulting surface. At the end of the work, special metal fasteners are glued to the corner and additionally treated with a new layer of finish.

There are many options for using corners in the interior.

After performing small construction manipulations, the angle is completely leveled and the desired visual effect is achieved. In difficult cases, absolutely any finishing materials can be used: from plastic panels to plasterboard elements.

Some difficulties arise when finishing corners other than 90 °, this requires special, so-called. folding corners.

In addition to the purpose of leveling the surface, these construction works are carried out to decorate the surface. A wide range of materials allows you to play with corners and make them real elements of the overall interior concept.

They can be used to decorate both external and internal wall corners.

Finishing the corners in the apartment involves the use of various decorating elements. This allows you to achieve completeness and aesthetic appeal. In addition, such manipulations are used to save space.

The corners can serve as niches for built-in furniture or cut out completely for arranging seating areas.

The influence of the use of finishing corners in the apartment

Different corner finishes are accompanied by their respective goals. So, if there are small children or animals in the apartment, then the corners are processed for the purpose of additional protection. A sharp impact can deform the desired shape and spoil the interior.

Their use in this case protects the edge of the slope from damage and prevents the wallpaper from peeling off, which quite often occurs at external corners.

Fans of unusual design prefer non-standard design of corners. It can be built-in furniture or arrangement of additional space. Various building materials can be used as finishes to influence the interior.

Great idea for saving space in the hallway.

Protect corners from damage

For protection, special protective corners are used. They differ from each other not only in the way of fastening, but also in the place of application.

In addition to the technical, the angular profile also carries an aesthetic load.

The range of such products includes the following variations.

• For visual differences. Protective corners come in different shapes and shades, which allows them to combine two functions at once: aesthetic and protective. So you can choose options to match the walls, doors, plinth. For a more unusual design, you can use different textures and catchy colors.
• According to the material used. A cheaper option is a plastic product. It happens in different colors, textures and even models with a transparent base. The metal options are more for protection than aesthetic appeal. To add a special touch to the room, you can use wooden options. In the construction markets there are corners made of different types of wood and with different surfaces.
• Form. According to this criterion, two types of products are distinguished: sharp and round. You can choose any shape of protective corners. The parameter does not affect the main function. It's more a matter of aesthetic appeal.
• Dimensions. You can choose completely different sizes. It all depends on the scale of the room and the walls in general. The largest option is considered to be a product with dimensions of 10mm x 10mm x 2.75 m. The minimum size is 5mm x 17mm x 2.5m.

The use of a white corner completes the window opening.

Visual impact on the interior

The use of corner finishing will achieve several goals at once:

• angle alignment for visual perception of a flat surface;
• performance of not only an aesthetic function, but also a protective one;
• reduction of pollution in hard-to-reach places of the ceiling and floor;
• wall decoration;
• saving space and installing additional furniture;
• improvement of doorways, window openings and joints between panels.

A profile that contrasts with the slope and wall decoration can create the desired color accent or become an independent original interior detail.

Depending on the material used, different decoration options can be achieved. Stone finishes will make any room unusual. Plastic materials will help achieve completeness and simplicity.

Silicone can perfectly complement children's rooms with their abundance of colors and high protective functions.

Designers prefer not to refine the corners, but to remove them. So, in place of the usual room walls, additional niches appear. They are a great help to save space, because other furniture and even household appliances are inserted there.

Such a “chip” in the interior can be used in bedrooms for bookshelves, in the corridor for shoes and in the kitchen for appliances.

Bold designers practice getting rid of corners. Instead, they equip an additional recess where you can place:

• interior items: vases, figurines, figurines made of ceramics or glass;
• relaxation space, where you can add a reading table or easy chairs;
• houses for pets;
• small home libraries or magazine shelves.

The corner of the room can be transformed into a practical rack for books and souvenirs.

Additional Information! In addition to the above, recesses can be used for other purposes. Fantasy knows no bounds and you can come up with any options for convenience and comfort in the apartment.

Materials for finishing corners in the apartment

Decorating corners in an apartment with decorative corners is not an easy process. In this case, due attention should be paid to the choice of material. The overall concept of the result depends on this.

Its appearance, technical characteristics and scope depend on the material of the corner.

Plastic panels

Such fittings are an inexpensive decorative material for finishing their polyvinyl chloride (PVC). The building material stands out for its resistance to alkali and acids. Light weight greatly simplifies the installation process. Also, PVC panels are not demanding to care for.

The palette of monochrome corners contains approximately 30 shades.

If cracks or deformations appear, parts can be easily replaced with new ones. At the same time, you will be pleased with the affordable price. A wide range of products will allow you to choose the right dimensions, shades and even shapes. The key advantages include resistance to moisture and lightness.

If necessary, the white profile can be repainted in any other color.

Transparent silicone corners

An attractive and flexible material that has found its way into bathroom corners. High resistance to water allows the use of the product in a humid environment of the room. At the same time, the corners themselves are flexible, which allows them to be mounted even on uneven surfaces.

The main drawback is a weakness for household chemicals. Therefore, the process of caring for this protective product becomes more complicated. For cleaning it is necessary to use non-aggressive chemicals or an ordinary damp cloth.

This material is quite soft and is well suited for rooms where small children are often present, because. reduces the risk of a child being injured by hitting a corner.

Builders prefer transparent silicone corners due to ease of installation. The design is attached by removing the protective film that covers the sticky base. Installation does not require additional equipment or mixtures.

Decorative rock

This material will always remain a leader among other building materials in terms of aesthetic appeal. This option for finishing the corners in the apartment will help create a special atmosphere and emphasize the unusual design solution.

It is best to decorate the corners in the apartment with a flexible stone.

Such material is important to use the owners of large apartments. Since the decorative stone itself takes up a lot of space. In a small room, its installation is considered irrational.

Decorative stone in the corners will look very nice.

Key features include:

• strength;
• a choice of different textures and shades;
• there are smooth and rough surfaces;
• resistance to physical influences;
• the ability to translate into reality any design ideas.

The use of stone is appropriate in apartments with a large area.

Drywall

A versatile material that is widely used for finishing arches, shelves, ceilings, walls and any openings. The fragility of the material does not allow mounting for the purpose of decorating the room. During installation, you have to add an additional construction stage, which includes fixing the structure with putty or other mixtures.

Drywall is affordable and affordable.

Conclusion

Now it’s clear how to decorate the corners of the walls in the apartment. With the help of such a construction trick, fragile surfaces can be protected from damage. And also add an unusual "zest" to the concept of the interior of the apartment.

To complete the finish, a profile from any of the above materials can be used.

To carry out repairs in an apartment or in a house is only half the battle. It is also important to maintain its condition for a long period. Difficulties can arise with this, since small children or pets are able to ruin wallpaper, flooring, doors and other finishing materials in a short period of time. The outer corners of the walls, which are located on the “passage”, for example, in the corridor or in front of the entrance to the room, may suffer the most. Is it possible to get rid of such an influence of time on the walls of the house and how can additional finishing of the corners in the apartment help in this?

Such material for finishing an apartment as corners has several purposes:

• visual alignment of the angle;
• protection from damage that is inevitable in an apartment or house, especially where pets live;
• pollution protection;
• decorating and decorating walls.

In addition, such decorative trimming of the corners can be successfully used to improve the appearance of doorways, window plumes and panel joints. Their use can only be limited by the imagination of the owners of the apartment. Thanks to a large selection of decorative corners, you can easily choose the best option for any room.

Advantages of plastic decorative corners

Options for mounting finishing materials on wall corners

The type of corners will depend on the option of their installation. Plastic products can be fixed using additional means (specialized glue, "hatless" carnations) or using an adhesive layer that has already been applied to the inner surface of the corner. A clear advantage of the second option is the flexibility of the product and the possibility of breaking it at any angle. But not all the material with which the corners of the walls can be finished, it is possible, even during the production process, to apply an adhesive composition. For example, artificial stone belongs to such a finishing material. It consists of tiles of different sizes, which are made of concrete or plaster. Decorative stone can decorate any external corner in the apartment. The design of modern hallways or living rooms in this way is very popular (photos can be viewed on Internet portals).

Regardless of the chosen type of fastening of this decorative element, the finishing of external corners should be carried out only after the repair of the walls is completed. That is, all the necessary work has been completed: wallpaper has been glued, paint has been applied, decorative plaster, etc.

Installation of plastic decorative corners

Before proceeding with the installation, make sure that the wallpaper, paint or plaster has dried sufficiently so as not to damage their surface with plastic. You should also purchase an adhesive that will be used to attach the decorative corner. If a self-adhesive model is used, then there is no need to purchase such a tool. Please note that the adhesive layer on such corners is covered with protective paper, which must be removed before gluing to the wall surface.

As mentioned earlier, the following can also be used as "fixing" means:

• carnations without caps;
• liquid Nails;
• sealant.

When buying liquid nails, you should pay attention to the fact that the product is not high strength (the degree of strength is indicated on the package, as well as the list of materials with which this product can interact). Since when used with plastic products there is a risk of corrosion. Liquid nails with high strength are designed for heavy (metal) parts.

Although decorative plastic corners can visually transform uneven wall corners, you need to determine what level of “curvature”. To do this, you can use a regular ruler or a flat board: it should be applied to the edges of the corners between which the unevenness is located and analyze the degree of "distortion". If the transition from a flat wall to a curved one is not very noticeable, then you can safely mount the product. Otherwise, if you install a decorative corner on a strongly curved wall, then after a while a gap will form due to a significant difference in the size of the corner.

Installation of decorative corners does not require special knowledge, even a beginner who does not have sufficient knowledge can do it. Since this product should be fixed only after the final processing of the walls, the process is greatly facilitated.

Installation instructions

For the installation of self-adhesive corners, the same sequence of actions is applicable, with the exception of point No. 1 (applying glue to the surface of the corner).

Instead of plastic decorative corners, MDF products covered with plastic film can be used, and, as noted earlier, decoration with decorative stone is also possible. All of these materials can also protect wall corners from chafing and damage. Photos of the corners in the design of which these materials were used can be found on Internet resources.

Decorative corners made of MDF, thanks to a wide selection of colors, can become a great decoration for any room. You can also attach them to the walls using special adhesives, sealants or liquid nails (on the packaging of the selected product, MDF should be in the list of materials with which the adhesive interacts). Like any other decorative corners, such products can be used not only to decorate walls, window and door spans, but also serve as decoration and protection for other interior items.

Repair in the apartment with his own hands at least once in his life was done, probably, by every person. Non-professionals sometimes find it difficult to cope with some tasks.

If you can level the surfaces of the floor and ceiling without any problems, then finishing the corners of the walls is not an easy task and will require some knowledge and skills. Protecting the corners of the walls is a must if there are small children and animals in the apartment.

After all, plaster mixtures are not durable, and one has only to touch the corner, as the plaster can crumble, especially at the outer corners.

Various types of corner protection

If the corners are very skewed, then you will have to spend a lot of effort and material to align them.

The inner corners are more or less protected by wallpaper, which allows you to hide the bumps. But the outer corners are always in sight and it is not easy to hide damage here. This requires the use of a special decorative coating.

To strengthen the inner corners of the walls, plastering of the corner itself and the wall adjacent to it is often used, and drywall is also used to correct and finish the corners.

You can protect the corners in the apartment in different ways and materials. When applying plaster, it should be borne in mind that this method is quite laborious and time-consuming. If the corners of the walls are too uneven, then a large amount of plaster will be required not only on the corner, but also on the walls.

A special metal corner will help form an even corner

As you know, the layer of plaster should not exceed 2 cm, otherwise cracks will occur. To close the inner corner, it is necessary to use a metal counter-corner.

The corner of the wall is pre-treated with a primer, then the counter-shults are covered with a layer of putty and, pressing down, are glued.

This metal corner has a reinforced mesh along the edges, which subsequently goes under the plaster and makes the corner even.

Using drywall and metal corner profile

Very often drywall helps to finish the corners and walls. With a slight curvature of the corner itself, a frameless method of fixing drywall is used, but if the curvature is more than 2 cm, it is worth using a frame made of a metal profile or wooden bars. This method allows you to achieve almost perfectly even walls and ceilings, but at the same time the size of the room itself is significantly reduced.

You can trim the outer corners of the walls in the apartment using a metal corner profile. This method of protecting the corners of the walls is the most optimal and allows you to protect the corner from any mechanical damage.

After the completion of all repairs, this corner becomes completely invisible.

The standard length of the metal corner is 3 m, if necessary, it can be easily cut with metal scissors.

If the corner is straight and even, then you can attach the profile with small nails, but if there are some irregularities, it is best to use alabaster or plaster to install the profile.

Protective metal corners allow you to achieve perfectly even corners in the apartment. Even a non-professional can cope with their installation.

Use of plastic PVC corners

PVC fittings are glued on top of the finish

To date, one of the most popular ways to design external corners is the use of plastic. Such wall corners are widely used and are suitable not only for decorating external corners, but also for decorating window and door slopes, panel joints and arches.

Available in a variety of colors, there are even transparent, have a width of 10 to 100 mm. The length of the PVC corners ranges from 1.5 to 3.0 m. They are already glued to the finished ones, preliminarily, often they complete the finishing work.

Advantages of PVC corners:

• affordable price;
• ease of use even for beginners in repair;
• a wide variety of shades;
• visually align even strongly curved corners;
• long term in operation;
• fairly easy to care for.

The decor of the corner in this way helps to avoid destruction and mechanical damage. Before gluing PVC corners, it is necessary to determine the degree of damage to the wall corner in order to correctly select the width of the plastic corner. Then you need to use a drywall knife.

You can glue these corners in different ways:

• using mounting adhesive for plastic products;
• using a solution of a dry putty mixture;
• glue can initially be applied to the PVC corner.

Apply the adhesive according to the instructions on the surface of the corner and press the PVC corner to the wall, remove excess glue and wait until completely dry. For best results, it is recommended to fix the plastic corners with masking tape.

The use of corners made of wood and polystyrene foam

Wooden corners are not very plastic

The decor of the corners of the walls in the apartment can also be done using wood corners. The advantages of this finish are that wood is an environmentally friendly material and has an attractive appearance.

Its plasticity allows you to carve the surface of a wooden corner, which will give the room a unique design. Using such decoration of the room, it is worth considering the need to avoid a sharp temperature drop, otherwise the wooden corners are deformed. It is impossible to glue this type of corners in rooms with high humidity. How to finish the corners with putty, see this video:

Probably the most affordable way to finish the corners of the walls of an apartment is a polystyrene corner. Such corners are easy to install and can be repeatedly painted. They are easy to care for, as they do not absorb dirt.

Such products are used in rooms with different temperature conditions and high moisture content.

Stone corners and their advantages

Synthetic stone is used to finish the corners

Stone has recently become one of the most popular ways to decorate and reinforce wall corners.

There are more and more rooms decorated with artificial stone.

With this method of design, there is no need for walls in the apartment; it is especially appropriate to use decorative stone with very uneven outer corners.

It should be noted that artificial stone is much lighter and more affordable than its natural counterpart and is easier to maintain and maintain.

You can glue the decorative stone yourself, for this you must first clean them from dust and dirt. Then dilute a special tile adhesive according to the instructions. Apply it in a thin layer with a spatula on the stone and in a thick layer with small cakes on the wall. The stone is applied to the wall and pressed, the excess solution is removed. For information on how to trim the corners with stone, see this video:

After pasting three rows, you should stop and let the mortar dry, then you can put three more rows of decorative stone. And so gradually finish the entire surface. Thanks to a huge selection of colors and textures, decorative stone can be matched to any interior.

Combine different ways of finishing corners

Following the listed types of finishing corners in the apartment, certain conclusions can be drawn. The most expensive type of finish is artificial stone, and the most time-consuming method of finishing is considered to be leveling the corners with drywall. Different types of finishing corners can be easily combined with each other and used in repairs at the same time. External corners with such protection will be installed "in the shield" and have an aesthetic appearance for many years.