The fact that there are not only cast-iron baths, in former Soviet times, many did not even know. Occasionally there were thin-walled steel ones, which, when filled with water, rang deafeningly, like bath basins. Such products were considered inferior and, if possible, were replaced by a classic cast-iron rectangular bath, of which there were two main types that differed in length: 150 and 170 cm. enough.
Difficult past
It is difficult to establish how much a cast-iron bath from the times of socialism weighs - the exact figure has changed over time. They gradually became lighter due to technological progress and the struggle to save materials from time to time. It is known that in the 80s cast iron bathtub 170 cm long weighed 168 kg, but this weight was not a record.
And today you can encounter a situation where, in the course of replacing obsolete plumbing, they collectively fight against such a monster: only 4-6 adult men manage to take it out from the upper floors and load it for removal. When looking at such a scene, the thought arises: how is the situation with such products today, is it not too problematic to equip a modern bathroom with a cast-iron water treatment tank? After all, it needs to be brought, raised to the floor, installed. Will its mass outweigh the traditional advantages of such a bath - durability, reliability, thermal comfort during long relaxing procedures?
Table of measures and weights
Practice shows that the opinion about the widespread transition to lighter steel and plastic spectacular acrylic is wrong. buy cast iron bathtubs continue in sufficient quantities, and not only lighter imports. Siberian and Kaluga producers continue domestic traditions, but at a higher technological level. Their products are deservedly in great demand and are considered the best offer in their market segment, taking into account the price-quality ratio.
Weight of imported analogies much less, therefore, in order to understand how much a cast-iron bathtub of different sizes weighs, data from Russian products should be given:
- 120 x 70 cm - 77 (±4) kg
- 150 x 70 cm - 92 kg
- 150 x 75 cm - 94 kg
- 170 x 70 cm - 110.5 kg
- 170 x 75 cm - 115 kg
European and Asian manufacturers are accustomed to the economical consumption of metal, so their baths are thinner and weigh an average of 20 kg less. Although under European brands there are exclusive objects larger than 200 cm and weighing up to 140 kg.
What problems seem real when choosing a cast-iron bath as a container for relaxing in water?
- High transportation costs.
- Difficulties in climbing to the desired floor.
- The problem of reliable installation in place.
Let's try to consider these questions in order.
Will the cover hold up?
The first thing that seems especially important when analyzing this issue is whether special measures are required to strengthen the floors when installing a cast-iron bath? How many additional supports should be brought under the longitudinal crossbars? Such reflections are especially relevant for amateur builders who build a house with wooden floors without professional calculations of a specialist designer.
How much does a container filled with water weigh with a person? Maximum value - about 700 kg. After calculating the point load on the floor, an approximate figure of 320 kg per 1 m2 is obtained. Such a value is quite acceptable for reinforced concrete monolithic and prefabricated floors with a sufficient margin of safety.
In the case of frame-type ceilings made of wooden load-bearing elements, reinforcement should be considered. Typically, such activities are carried out in conjunction with the waterproofing work necessary for the equipment of the bathroom.
Loading, unloading, delivery
Knowledgeable people who sell and deliver bathtubs claim that cast iron bathtubs are heavier compared to steel and acrylic do not create insurmountable problems during transportation.
Of course, if you do not manage on your own, you cannot avoid the cost of movers. On average, it costs 100 rubles for the lift, in case of its absence - 100 rubles for each floor. But only a couple of people of average physical capabilities cope with this.
Reliable installation
Manufacturers of cast iron products provide a complete set of legs and fastening systems for reliable installation of plumbing. Uniform parts allow you to easily approve the bath in place.
Further, the solid weight of the cast iron product turns into one of the advantages. The tub stands securely, without bending or moving. A person of the most impressive complexion can take water procedures in it without losing stability and balance. Such problems can become a serious inconvenience if you use lighter specimens made of steel or plastic, especially low-quality ones.
Rectangular cast iron bathtub due to high weight does not move away from the wall, which contributes to the preservation of the waterproofing of the junctions, preventing unnecessary leaks.
No problem
The heavy weight of cast iron cannot be an obstacle when choosing the right set of bathroom equipment. You should pay more attention to other qualities of the product: size, design, properties of the enamel coating, etc.
A bath is present in every home. The product is made of different materials, such as steel, acrylic, cast iron.
Due to their qualities, cast iron bowls are popular.
When buying and installing, in order to avoid problems, you should find out how much a cast-iron bathtub weighs.
The weight of a cast-iron bathtub is directly related to its dimensions and model. Thanks to new technologies, cast iron bowls are lighter than they were 40 years ago.
table
| Standard cast iron bath weight(kg) | ||||
| Length(cm)/width(cm) | 70 | 75 | 80 | 85 |
| 150 | 80-90 | 90-100 | 100-110 | 110-120 |
| 160 | 85-95 | 95-105 | 105-115 | 115-125 |
| 170 | 95-110 | 110-125 | 125-140 | 135-145 |
| 180 | 115-135 | 130-150 | 145-165 | 160-180 |
Example
For comparison, a Soviet-era bathtub 150cm by 70cm had a weight of 120kg.
For your information. Products of foreign manufacturers, in particular Chinese ones, are lighter. This is due to the fact that the manufacturer saved on materials and did not follow the casting technology.
Imported bowls are usually small, up to 40cm deep. It is difficult even for the average person to lie down in such a bath.
There are many companies that produce excellent quality cast iron fonts. Where the material meets all requirements and has excellent characteristics. When purchasing a cast-iron bath, you should carefully read the manufacturers.
Imported bowls can meet all requirements and be thinner and lighter at the same time. The walls of the bath according to the standard are not higher than 1 cm.
Benefits of cast iron bathtubs
Product Disadvantages
- The coating is not resistant to mechanical damage.
- Transportation and installation are complicated.
- The product is not perfectly symmetrical.
Warms up for a long time. If you decide to take a bath, you will have to wait.
Dimensions
- Soviet baths were made 120, 150, 170 cm long.
- Modern 80-180cm.
- Standard width 70-75cm
- Modern 60-80 cm
- The depth is usually 40-50 cm.
- Modern products up to 60 cm deep.
Manufacturers
- 170-75 cm weight 114kg. producer "NOSTALGI" Novokuznetsk
- 150-70 cm weight 104 kg producer "Laguna-Lux" Kirov
- 150-70 cm weight 73 kg Roca Continental
- 170-70 cm weight 121 kg manufacturer "Jacob Delafon"
Cast iron casting is a rather laborious and complex process, for this reason, most products have standard shapes.
Manufacturers are trying to diversify the types of products
On the market there are models with hydromassage, sitz baths, products on non-standard supports, different colors, with handles, wall-mounted, free-standing, figured, with backlight.
- Sitting bath. 120,140-70cm is ideal for installation in a room with a small area. The advantages of the product are the use as a shower tray, it is convenient to bathe children, more free space.
- Standard bowls. 150.160-70 cm are suitable for installation in almost all apartments.
- Enlarged 170-70.75 cm, space required for installation. It is comfortable for large people to take water procedures.
- Large bowls 180-80 cm and more. Installed in the bathroom of the appropriate footage. The floor must be durable with a high-quality coating, due to the large weight. (More than 150 kg)
- designer models. They can be both wall-mounted, and free-standing, and corner. Every possible form. Sizes range from tiny to gigantic. It all depends on the imagination of the designer or customer.
As an example " Kohler” released a corner bath, which no manufacturer before him could do.
The sizes of corner baths are from 90 cm to 200 cm. The product can be equilateral or asymmetrical. Many people think that such a bowl saves space - this is a delusion. It occupies the same area as the standard one. The advantage is that one of the corners at the installation site is freed up, which can be used for other needs. And as a bonus, it's still creative.
Of course, designer fonts cost several times more than ordinary ones.
How to choose a bath, what you should pay attention to
- Coating. Smooth, even, uniform color, no bumps, chips, cracks.
- Dimensions. Should correspond to the footage of the installation site.
- Make sure that the product can easily pass through all doors and turns to the installation site.
- If the coating is not even at the installation site, it is worth buying a bath with mounts (on legs)
- To avoid buying a fake, ask for a certificate for the product and a warranty card.
Not so long ago, cast iron sanitary ware was a huge success with consumers. Cast iron bathtubs and to this day occupy far from the last place in the world of sanitary products. Perhaps the only drawback of such products is the weight. So how much does a cast iron bath weigh? That is what this article will be about.
General information
When a consumer chooses a suitable model of plumbing for himself, he is concerned not only with the dimensions, shape and aesthetic side of the issue, it is also worth taking into account the weight of the cast-iron bath. Indeed, the level of complexity of transporting plumbing and its direct installation depends on this indicator.
Reference: The weight of the Soviet cast-iron bathtub was so large that even two adults found it very difficult to cope with such equipment. At that time, as a rule, models of standard sizes 150 × 70 cm were installed. In fact, this is a medium-sized bath, but it weighed at least 100 kg.
To date, the technology for manufacturing plumbing fixtures has changed a lot, so the weight of a cast-iron bathtub has significantly decreased. Of course, the difference cannot be called colossal, about 30-40 kg, but for one product this is a lot.
Weight of standard models
The large mass of the cast-iron bath is both an advantage and a disadvantage of the product. For many consumers who want to purchase devices made of cast iron, this aspect is very embarrassing. But modern models weigh much less than those produced during the Soviet Union, but the stereotypes still remain.
How much does a cast-iron bathroom of domestic and foreign production weigh? Other things being equal (width and length), the mass of domestic products will be only 20 kg higher than foreign ones. The thing is that foreign manufacturers often save on materials, and this affects the quality and durability of products.
As a rule, imported devices are very compact in size. For example, the depth of an imported bath tank, as a rule, does not exceed 40 cm, despite the fact that normally it should be at least 50-60 cm. Therefore, when purchasing such products, you run the risk of simply not fitting into it.
Important! Be sure to take into account the mass of the font if you intend to install it in an apartment in a multi-storey building. After all, a very heavy product can create a serious load on floors that are not designed for such pressure. At the same time, it is worth considering that the mass of the device with water will be even greater.
For clarity, consider an example. Suppose the weight of a standard cast iron bath is 110 kg without water, with water - 160 kg. A person who is about to take a bath weighs 80 kg. Then the total mass of all "components" will be equal to 240 kg. At the same time, wooden floors without any reinforcement can withstand a weight of only 160-240 kg.
Based on the foregoing, the conclusion follows: before purchasing heavy equipment, make sure that its installation will not create a critical load on the floors.
Tabular data
How much an old cast-iron bathtub weighs depends on several factors:
- Depth of the tank;
- The thickness of the walls of the product;
- The length and width of the font itself.
In this case, the weight of the device may be different depending on the manufacturer. After all, some manufacturers deliberately reduce the thickness of the walls of the product, then the bath becomes easier.
The weight of an old cast-iron bath of traditional dimensions (170 × 70) can range from 90-95 kg to 100-120 kg. In the table you can see the approximate weight of products of the most common sizes:
How much does a Soviet cast-iron bath of the same dimensions (170 × 70) weigh? Soviet products are very heavy due to the wall thickness, which is at least 5 mm. Such a Soviet-style font weighs about 180-200 kg.
Pros and cons of cast iron
The significant weight of the equipment in many respects has a positive effect on the characteristics of structures:
- Strength. Cast iron is a very strong and durable material that is practically not afraid of mechanical stress;
- Large wall thickness provides protection against vibrations;
- The weight of the products guarantees the stability of the structure. It will not roll over if you, for example, sit on the edge of the tub;
- It retains heat well, so the water does not cool for a long time.
It should be noted the disadvantages caused by the severity of the devices:
- Weighty plumbing is very problematic to transport;
- Due to the large mass, the installation process of products is complicated;
- Dismantling the device is also not easy. A heavy bathtub often has to be smashed or sawn apart so that it can be carried out of the room.
What is the mass of lightweight cast iron?
The modern consumer is rarely satisfied with compact fonts. Today, spacious and capacious tanks are a priority. Since cast iron products have long established themselves as strong and durable devices, the sympathy of a large number of consumers is addressed to lightweight cast iron models.
For your information: Bathtubs made of lightweight cast iron differ from traditional models in the thickness of the walls and bottom. For example, a traditional 150 x 70 piece will weigh about 105 kg, while a lightweight cast iron model will be about 10-12 kg lighter.
The difference is small, but if we consider large-sized models, it turns out that lightweight cast-iron bathtubs weigh 50-60 kg less than standard ones, and this is a very significant difference.
Advantages of lightweight material:
- Less weight;
- The material has good thermal insulation;
- Excellent sound insulation;
- Low cost, in comparison with conventional cast-iron fonts;
- Easy care cover.
It is also worth noting the disadvantages of lightweight equipment:
- A small weight of products is achieved by reducing the wall thickness, and this is reflected in such an indicator as strength;
- Durability. Lightweight devices are subject to mechanical stress, so they last an average of 10 years less than standard models.
Results
If you intend to purchase a cast-iron font, first you should find out how much the cast-iron bath has. This parameter must be taken into account when installing equipment in multi-storey buildings. If heavy plumbing does not create a special load on concrete floors, then the situation is different with wooden beams.
The modern market offers a huge selection of cast iron sanitary ware, so you can purchase a model of the right size, shape and color. Despite the fact that significant weight is a disadvantage of the devices, they have practically no demolition. Therefore, a cast-iron font will serve you for many years.
A cast iron bathtub is a great choice for relaxing in the bathroom.
Such a container retains the heat of the collected water well, has excellent stability due to its large weight. It is about the last parameter that it is worth talking about, paying enough attention. After all, many are interested in the question, but how much does a cast-iron bathtub weigh. This is especially true for the most common sizes: 150x70 and 170x70.
The fact is that for many, the significant weight of these products is a minus. Basically, this attitude is caused by difficulties in delivery and installation. At the time of the Union, a standard 150x70 cast-iron bath weighed approximately 120 kg. Now this indicator has significantly decreased due to the use of new technologies in production. Moreover, some foreign samples can compete with domestic ones, overtaking them in weight by 20 kg (down).
However, it is not worth much to covet such models, since they have one significant drawback for our person - a shallow depth, which is about 35 cm. It is not very convenient to fit in such a container.
The relationship between weight and size
As we found out, the weight is determined by the size of the product. Of course, the wall thickness still plays a role, but the main influence is still the size. Therefore, consider what the approximate weight can be for certain standard sizes of cast-iron bathtubs:
- 150x70 cm - 80 kg;
- 160x70 cm - 85 kg;
- 170x70 cm - 120 kg;
- 170x80 cm - 140 kg.
Of course, the given parameters are indicative and may differ for each manufacturer, taking into account the manufacturing conditions: the raw materials used, the equipment and technologies used.
Impact on other aspects
If the choice falls on a cast-iron bath, then it is necessary to take into account the load that it will create. And it will develop not only from the weight of the product itself, but also from the water collected in the bowl, as well as from the person who will be in the bathroom.
These data should be taken into account when installing a cast-iron bath on a certain ceiling. So, for concrete floors, the weight of the bath, water and a person does not represent an excessive load (320 kg). Another thing is a wooden floor, which can withstand up to 250 kg. In this case, it will be necessary to carry out additional measures to strengthen the overlap.
The most common format for cast iron bathtubs is a rectangular shape. Unfortunately, the material does not allow making a product, for example, in the shape of a star. However, through the use of original design ideas, you can get a model of a non-standard look. For example, apply curved lines, add chrome handles, change the color and so on. And even if such decisions can affect how much the product weighs, aesthetic pleasure will be provided.
Even the coating, or rather its thickness, affects the weight of the model. In general, this indicator is very important when choosing. The enamel of the product should be uniform, smooth, without "concentrations" of color.
Advantages and disadvantages
Consider also some of the advantages of cast iron baths:
- strength - due to the large weight of the products, reliable protection against vibrations is provided, which are not dangerous for humans, but they can change the geometry of the joints, which can lead to the spread of moisture, fungus;
- a long time of maintaining the temperature of the water allows you to enjoy the water procedure as long as possible;
- the noise of falling water is not as strong as in the case of steel samples;
- ease of care - no special tools or manipulations are needed, ordinary periodic care with a final wipe dry is enough;
- durability - the service life of the product can reach 25 years, even more.
Among the shortcomings, the main one can be distinguished - weight. It causes the need for additional costs during transportation and installation, because assistants are needed to move the cast iron product, especially given its fragility.
So that the purchased cast-iron bath does not cause disappointment, choosing it, you need to be guided by the following characteristics:
- the size,
- depth.
The last parameter is often overlooked.
Before you start choosing a purchase, measure your bathroom. A third part is allotted for a bath in it and nothing more. The area of the room will be the main defining moment.
The following types of cast-iron bathtubs are distinguished by size:
- The smallest. Their width, as a rule, is 70 cm, but the length can be 120, 130, 140 cm. It weighs from 77 to 84 kg. This is the perfect solution for small apartments. A small bathtub will successfully fit into a room with a small area, or an unusual layout. These dimensions, of course, will not allow you to lie down, but a semi-sitting or sitting position is quite acceptable. It is also suitable for families with small children. Bathing them in it is easy.
- Small. This is the most common type of cast iron structures. Their length is 150 cm, and their width is 70 cm. Their weight is 92-97 kg. Capacity - about 170 liters. Ideal for small bathroom decor. It can be used by people of average build.
- Medium. Their weight starts from 100 kg. Their width is the same as those described above, but the length is 160 cm. It contains 173+ 2 liters of water. The sizes are quite comfortable, but they are not easy to find.
- Large. The length of a large cast-iron bath is 170 cm, the width can be 70 or 75 cm. The weight ranges from 113 to 119 cm. It holds a little more than 180 liters. If the bathroom is elongated, then it will be a real find for its owners.
- Very large baths. Their length is 180-185 cm, width - 70, 80, 85 cm. Capacity 190+ 5 liters. The product weighs at least 115-120 kg. It is possible to install it only in rooms of a very large area. If you wish, you can even take water procedures together.
- Huge. Their length starts from 2 m, width - 85 cm. Owners of large bathrooms can afford such dimensions. It is ideal for people with a lot of weight. As a rule, they are not on the open market. This is exclusively made to order.
