A plastic bottle is a versatile material from which you can make many kinds of crafts. Especially if the conversation is about summer cottages. In this article we will tell you how to create a small oasis in your backyard. We will create a lake, but at the same time it does not need to change the water and carry out seasonal cleaning.

Raw material for creativity

. Several dozen plastic bottles of the same volume. Their number depends on the size of the future lake.
. Shovel for digging.
. Sand.
. Blue car paint (it will hold up for a long period of time).
. Decorative birds and water lilies to decorate a plastic pond.
. Stones and lime.

Getting Started

We begin work by filling the bottles with sand. Of course, you can leave them without it, just screw the lid tightly. Or use water. This is necessary to give the container rigidity when we dig it into the ground. Next, follow the next steps:

1. Color each bottle blue. It will be easier to use a spray can or a sprayer.

2. We plan a place for the future reservoir. It is necessary to dig a pit a little and soften the earth by digging it. This is necessary so that the bottle easily enters the ground. The ideal option would be to use a sand base. It is easiest to insert objects into such raw materials.

3. Now carefully stick the bottles with the cap down. We should only stick out the tops. Bottles should be pushed tightly to each other. So you get the impression that a natural reservoir has spread in front of you, which will still give glare in the sun.

4. In a circle, lay out the stones that are covered with lime.

5. The final touch will be the decoration of the plastic reservoir with various water lilies, storks and frogs. Do not limit your imagination and decorate the lawn at your discretion.

This decor can be used on the playground of the kindergarten. It will look attractive and cute. Yes, and the suburban area will be transformed if such a fabulous lake with inhabitants appears on the flowerbed.

Caring for him is also easy. Periodically wash your masterpiece with a stream of water from a hose.

As you all have already noticed, this summer a lot of flowers have appeared in my garden. garden crafts from plastic bottles. And during their manufacture, I often cut off the bottom and neck of the bottles. It was a pity to throw away valuable material, and over time I gathered a whole box of all sorts of scraps. How not to use them and not create a cute lake in the garden?
Materials:

• Bottom from plastic bottles - 50 pieces, but more can be.
• Blue paint (enamel or spray)
• stones
• Plastic bottles green, yellow, transparent or white
• spatulas
• Floral ribbon brown and green (for reeds)
• Scissors

Let's start:
If you don’t have bottoms, then we will start the work by preparing them. Then you choose the sequence yourself: either paint and then install, or vice versa.

So, after you have formed a lake of bottles, we lay out stones along the edges. Cut out the middle part from green plastic bottles and cut through the stripes, but not completely. We place greenery around the lake.

The reeds are made like this: the cap is wrapped with green floristic tape, and then with brown floristic tape.

It's time to start making flowers:
From a yellow plastic bottle, cut out 1 blank for the middle of the flower and a strip - a fringe.

We also cut out flower petals from a transparent container painted with spray paint.

We proceed to the assembly: we twist the fringe, fix the end with glue or burn it. The workpiece needs to be held a little over the fire. We also hold a yellow flower-shaped workpiece over the fire, and then glue the workpiece (fringe) into the middle. On the reverse side, glue the petals and also hold a little over the flame.

The original pond for giving can be made from plastic bottles. In the photo you can see how this idea was implemented. The color of the bottles was originally white, they are from drinking water.

The owners of the site decided not to dig a pit for a pond, but used raw materials that are usually thrown into the trash. During the winter, plastic one and a half liter bottles of drinking water accumulated. Ordinary transparent. Then, when spring came, and with it the summer season began, the bottles were cut off by a third from the bottom, painted from the inside with blue spray paint.

Distributed on the site according to a pre-prepared perimeter template made of stones. The stones, by the way, are also painted white with spray paint. Additionally, several artificial plants, flowers and herons were stuck into the "pond".

The result is always a beautiful pond, which in its originality is not inferior to natural analogues. The idea will be of interest primarily to those who do not like unnecessary trouble, but at the same time want to make their cottage attractive and interesting in their own way.

Bringing plastic to life

Who dreams of a water lily pond the way I dream of it? Here is a photo of a pond with these flowers. It's beautiful! Very. I wish I could do something similar in my area.

It would seem that a plastic bottle is such an ordinary thing, but once it was worth its weight in gold - our grandparents carefully folded precious containers on the balcony to use instead of a milk can or a jar for storing compote. Now PVC bottles are a dime a dozen, so humanity has become thoughtful, because soon there will be nowhere to step because of plastic containers. How to adapt all this abundance of plastic for the benefit of the business? The most amazing ideas using the costs of the food and chemical industries are floating islands and huge installations, residential buildings and energy-saving systems created from a lot of waste plastic containers. We invite you to join the global plastic bottle boom. Evaluate the original garden crafts from used packaging that we offer you as an ideological basis for further creativity on the way to creating an amazing and unusual country design.

The burning problem of all summer residents is the laying of a house and ancillary buildings on a garden plot in the conditions of a small area of ​​​​land allotment and limited funds. In addition, the seasonal purpose of the dacha does not imply the construction of capital buildings "for centuries."

So, the enterprising people decided to adapt a prosaic plastic bottle as a building material. The walls of houses, gazebos, greenhouses, and other garden structures are laid out traditionally - in a checkerboard pattern using cement mortar, but instead of bricks, unnecessary plastic containers filled with sand are used.

To maintain this not quite familiar eco-style, you can make a variety of crafts from bottles for the garden so that the design of the site is decided in a unified way. Let's take a closer look at how you can make your life easier and more comfortable with the help of PVC containers.

Country house

Despite the seeming simplicity of building a building from plastic containers, there are some nuances that you need to consider if you decide to build a country house with your own hands. Here are a couple of helpful tips:

• Lay a reinforcing mesh between the rows of masonry - the adhesion of the solution to the surface of the bottle will improve.
• Do not forget that plastic does not come into contact with cement, like brick, so make small holes in the container - this way the mortar will begin to interact with the sand inside the bottle and the wall will become stronger.
• During masonry work, fix the bottles with a rope or wire so that the rows do not move apart.

Keep in mind that plastic tends to break down under the influence of frost and heat, especially from temperature changes, so be prepared that after some time - 5-10 years, the walls of the building will begin to “countdown”.

Using PVC bottles as a building material, you can build an economy house in the country

The cylindrical shape of plastic bottles allows you to build houses and gazebos, round in plan

In addition to the supporting structure of a house made of plastic containers, this versatile building material, as it turned out, can be used for roofing. We offer you two options for a roof made of used PVC containers:

1. Plastic tiles. For the manufacture of this simple roofing, it is necessary to compress plastic bottles. If this process is carried out without light heating of the plastic, then the containers will simply crack, so the easiest way is to put the raw material in the sun and then flatten the containers. Installation of PVC modules is carried out with conventional self-tapping screws to the frame with laying the material in several layers. From such tiles, you can easily form a cone-shaped roof for a gazebo or bath.
2. Plastic slate. It is easy enough to make something like a slate roof covering from the cylindrical part of a plastic bottle. To do this, it is necessary to cut off the bottom and neck from the container, cut the middle part of the container lengthwise and in half, connect the resulting PVC elements with glue, forming a wavy surface.

If you decide to build a house of wood, brick, or there is already a residential building in your summer cottage, pick up a plastic bottle, show your imagination - decorate the facade with an unusual decor made of plastic corks. Complex geometric patterns, floral patterns or slightly naive "cartoon" animals - choose for yourself any style that suits your spirit.

It is quite affordable to make a roof for a summer residence from plastic bottles - either in the form of tiles, or in the likeness of slate

Bright plastic lids from used containers will give the facade of a country house an expressive flavor

Decor from bottle caps for the facade of a country house will give the building a personality

Gazebos, greenhouses, pergolas

The most rational use of plastic bottles for the garden is not only crafts designed to decorate it, but also more significant things, such as greenhouses or. Why buy expensive polycarbonate for building a greenhouse if the PVC from which the container is made is practically the same material?

Why equip the greenhouse with even more expensive glass than laminate if there are unnecessary bottles? By refracting the sun's rays, PVC packaging performs the same tasks as glass with polycarbonate, moreover, it is the most economical option for building a greenhouse that you can find.

An economical option for arranging a gazebo or greenhouse in the country - building from plastic bottles

If you are bored with the traditional rectangular gazebo, make it in the form of a hemisphere using a metal frame and plastic bottles

Having built a frame of wood or metal, arm yourself with a red-hot knitting needle, a drill or a hammer with nails. In one of the ways, make holes in the bottom and cork of a plastic bottle and put plastic vessels on a fishing line or wire, the length of which will be slightly more than the height of the building. Stretch the resulting elements and fix them on the crossbars of the frame - this is how you will form the walls of the greenhouse or gazebo. Additionally, you can fix the vertical modules in the transverse direction by tying the bottles within one row with wire. Using containers of different colors, try to create some kind of ornament - this is how you diversify the colorless mass of walls made of transparent plastic.

What else can be built from plastic bottles for the garden? The most easily erected version of a small architectural form from plastic bottles in the garden is a lightweight gazebo, which usually serves as a frame for climbing plants. However, despite the fact that in spring and summer the structure of the pergola will be hidden by weaving roses or ivy, in winter its frame will be exposed and will not look very good. To avoid this phenomenon, you can ennoble the design of the pergola with plastic bottles of a natural shade - brown or green. The brownish colors of PVC vaguely resemble wood, and the grassy ones will enliven the look of the garden in the cold season.

Fences, railings, gates

A lot of money can be saved if you use plastic bottles to equip the fence of the garden plot. Using the same principle that was described in the construction of the gazebo, instead of corrugated board, chain-link mesh or polycarbonate, use plastic containers to fill the space between the fence posts.

A little creativity and diligence - the border of your garden will become not only impassable, but also extravagant, attracting attention. If the fence has already been erected before, a new sound will be given to it by a floral decor made of plastic bottles - the most natural option for a garden.

In support of summer cottages from plastic bottles, build a fence using the same containers for the integrity of landscape design

Multi-colored flowers cut out of plastic bottles will refresh and decorate an old fence or country house

carport

The eternal problem of car owners is the allocation of space on the land for parking a car or several vehicles - bicycles, scooters or ATVs. Not always the project of a compact private or country house involves a room for a car, so it becomes necessary to build a detached garage or shed. The construction of these structures is expensive and many cannot afford, so the car is standing under the scorching sun, open to winds, rain and snow. Ordinary plastic bottles come to the rescue in this situation - junk, useless containers that allow you to experiment without fear, without fear of spoiling the building material. If something does not work out and the bottle becomes unusable, you can always take another one and not lose a penny.

Also, material on parking options for a car in the country will be useful:

A canopy for a car made of plastic bottles will not only fulfill its immediate function, but will also bring an original accent to the country landscape

So, from plastic bottles you can form a plastic structure, unusual in its configuration and performing several functions at once - it will create a protective plane from precipitation, the sun and, at the same time, decorate your garden. There is nothing difficult in forming a canopy from bottles - it can well be made by hand.

First, you need to make through holes in plastic containers, or rather, it is best to burn them with a red-hot rod, and then put the bottles on a fishing line, rope or wire, connecting them in rows. Between themselves, the sequences of bottles are fastened with perpendicular bonds by means of another pair of holes and the previously selected material for “firmware”. Thus, a movable surface is obtained, resembling a “bottle cloth”, which remains to be attached to a metal or wooden frame using hangers of different lengths to create a wave-like effect.

It's important to know! Considering that a plastic bottle is a kind of lens that refracts light like glass, it is advisable to paint over the bottom of the container to block direct sunlight.

Useful devices for the garden

solar collector

Surely you have come across the fact that there is no central water supply in the country house, you did not have time to get a boiler, and after a hard day of caring for the garden, you really want to take not an ice shower, but wash yourself with warm water. We suggest you try to make a summer shower for your site with an energy-saving system - a solar collector made of PVC bottles. The principle of operation of such water heating is based on the so-called "thermosyphon" - denser hot water moves up, less dense cold water moves down. The developer of the system, a Brazilian engineer who received a patent for the invention, claims that 1 m 2 of the solar panel will be enough to bathe 1 person.

From plastic bottles you can assemble a solar panel and forget what ice water is in a summer shower

Cold water coming from the tank to the solar collector is returned already heated

Consumables and tools for making a collector from plastic bottles:

1. 2-liter plastic bottles - 60 pcs.;
2. 1-liter milk bags - 50 pcs.;
3. PVC pipe 100 mm - 70 cm;
4. PVC pipe 20 mm - 11.7 m;
5. PVC corner 20 mm - 4 pcs.;
6. Tee 20 mm PVC - 20 pcs.;
7. Plugs 20 mm PVC - 2 pcs.;
8. PVC glue;
9. Black matte paint;
10. Brush;
11. Emery;
12. Scotch;
13. Rubber mallet, wood jigsaw.

Plastic bottles need to cut off the bottom and insert one into the other. 100 mm PVC pipes are used to form a rectangular solar panel frame, 20 mm pipes are cut into 10x1 m and 20x8.5 cm sections and assembled into a single structure using tees. One meter long pipes and milk bags are painted with black paint, which are placed under the bottles to improve heat absorption.

Solar panels made from plastic bottles should be located at least 30 cm below the water storage tank on the south side of the wall or roof. To optimize heat absorption, the panels must be installed at an angle calculated as follows: add 10° to your latitude. It is recommended to replace plastic bottles in panels with new ones every 5 years, as after a while the plastic becomes opaque, and this reduces its thermal conductivity.

Another energy-saving idea "sailed" to us from hot Brazil called "1 liter of light." The essence of this engineering thought in terms of how to illuminate a room without windows on a sunny day is striking in its simplicity - it is enough to hermetically integrate a plastic bottle into the roof - but not empty, but with water. It is water, refracting the rays of the sun, that will fill the room without natural light with bright light.

By pouring water into a plastic bottle and crashing it into the roof of the house, you will always have a bright source of light in rooms without natural light.

Growing and watering plants

Plastic bottles will be useful in the garden not only for buildings or decor, but also directly in growing plants, flowers and vegetables. By cutting a hole in the container and filling it with earth, you can use a plastic container for growing seedlings. Just don't forget to drill holes in your new pots for drainage and take care of water drainage.

Glue corks to a plastic bottle - you will get funny little men instead of boring pots for growing seedlings

Pots for growing plants can be given a little color by painting them with stained glass paints or decorating with bottle caps. If your dacha is small in size - try to create vertical gardening - hang plastic pots from bottles on a fishing line under the wall. So you decorate a deaf, inexpressive plane and save space.

To create pots for seedlings and flowers, not only plastic bottles for drinks are suitable, but also multi-colored containers left after using household chemicals

Make multiple holes in a plastic bottle - this will allow you to get a drip irrigation device in the country

PVC bottles also come in handy in the process of watering the garden, if you poke miniature holes in the bottom of the bottle and attach the container to the hose, you will have a good tool for drip irrigation. Equipping a home-grown bottle water sprayer with wheels from an old baby car or stroller, you can move the watering machine around the garden.

Garden and home furniture

A lot of trouble for summer residents is the care of furniture in the garden house and on the street - the constant proximity to the ground negatively affects the appearance of sofas, beds and armchairs. Having built country furniture from plastic bottles, you will forget about what a sloppy upholstery is, which is so hard to put in order outside the city, away from service and dry cleaners. The containers and corks themselves are a unique material for the production of furniture with your own hands - durable and easy to clean.

From plastic bottles you can assemble quite practical furniture for the garden and at home.

Chairs and a table for summer cottages made of plastic corks are an economical solution for outdoor furniture

A convenient ottoman for giving will turn out from unnecessary plastic containers wrapped with foam and covered with upholstery fabric

A couple of dozen plastic bottles, a metal frame - and a comfortable chair for the garden and cottage in front of you

garden lamps

Lighting fixtures for the garden plot is another expense column that gardeners often ignore. With a plastic bottle, the lighting problem is solved in a minute. Take a colored canister from household chemicals, cut off the neck and fill the cartridge with a light bulb inside - the dacha lamp is ready. Create a more complex ceiling configuration by deforming plastic bottles by heating, melting the edges and painting in different colors. Original lamps made of PVC containers will perfectly replace industrial analogues, as well as decorate your home and garden.

To create an original design for dacha lamps, it is enough to paint them with stained glass paints or deform them a little.

From plastic bottles you can get unusual street lamps for giving - both electric lamps and candles serve as a light source in them

Landscape decor from plastic bottles

When creating garden decorations from plastic bottles, everything is used - the whole container, the bottom and neck, the middle part and cut out fragments, and corks are especially popular. They make a very expressive decor for the garden - paths and decoration of empty planes of the house or fence. Another unforgettable decoration of the site can be installations made of PVC containers - three-dimensional and planar figures of animals and plants. Flowerbeds and borders that limit the planting of different types of flowers can be successfully made from the same plastic container. And so that your ears are always delighted with the singing of birds, hang feeders and drinkers for birds made with your own hands from PVC bottles on the trees.

Multi-colored corks from plastic bottles serve as an excellent material for creating planar compositions in a country landscape

Examples of flower beds

Without a doubt, the main decoration of a summer cottage is flowers formed into flower beds or growing in a picturesque mess. A special “cutting” of the flower bed is given by low borders that outline its shape and complete the flower arrangement.

In the absence of stone or brick, traditionally used to form a border, bury plastic bottles upside down along the border of the flower bed - you will get a simple fence for flower planting. A good solution for the shady areas of the garden plot, where nothing wants to grow - the original flower beds made of PVC containers, various in shape and color.

Arrange with the help of a flower bed made of plastic bottles shady or swampy areas of the garden

A small flower bed in the form of a ladybug looks bright and unusual

Green plastic bottles are perfect for forming a border for a flower bed

garden paths

The issue of laying garden paths is always difficult - and you need to strengthen the soil, and buy decorative material - as a result, a considerable amount is obtained. And you don't want to walk in the mud. While you are accumulating money and looking at the pavement for the tracks, we offer you a temporary option for arranging them at minimal cost. Fill the paths in the country with a thin layer of cement mortar and immerse plastic bottle caps in it - due to the corrugation along the side plane, they will be well fixed in the building mixture.

A prosaic cement walkway can be turned into a picturesque mural thanks to multi-coloured plastic covers

Decorative installations

A fairly popular direction for decorating a garden landscape is the creation of voluminous installations from various improvised materials, including plastic containers. However, here you need not just some skill and patience, because you need to lay out either whole containers or parts cut out of them according to a certain pattern.

The most expressive decor for a garden landscape is voluminous installations from plastic bottles

We suggest you make a not very complicated installation of plastic bottles in the form of a Christmas tree in the country. Although the New Year is still far away, as they say, prepare a sleigh in the summer - think about it in advance. Of course, the Christmas tree is the main attribute of the winter holiday, without which it is impossible to create a truly upbeat, New Year's atmosphere. What if there are no coniferous trees on your site, and you do not welcome traditional logging on the eve of the New Year? An excellent solution in its simplicity and environmental friendliness is the creation of a Christmas tree from plastic bottles.

The basis of such a composition is a rigid rod, to which the bottles can be hung or put on a wire and wrapped around, create tiers of circles, tie or install auxiliary supports and form a tent tree shape.

It is not necessary to make a Christmas tree from standard green plastic bottles - it can be assembled from containers in any shade

Whole plastic bottles, and bottoms, and chopped parts of the container will be used. The bottles themselves can be deformed, melted, painted in unusual colors - in general, there is room for imagination and ingenuity to roam. Do not discount bottle caps either - they will make unusual garlands and miniature decor.

By the way, the Christmas tree does not have to be hidden or dismantled for the summer season - if you choose a cone-shaped tree, then the internal space of the structure will serve you on hot days as a gazebo or become a place for children's games. From used green sprite bottles, you can make a miniature Christmas tree for the house, you just need to cut the curved planes of plastic containers with “noodles” and stick them on the base.

Bird feeders and nests

One of the types of garden decor that combines many functions - feeders, nests and drinkers for birds. A feeder made with love will decorate the garden and attract birds - they will repay you for your kindness with cheerful chirping, destroying garden pests at the same time.

Create nests, drinkers and bird feeders from plastic bottles and paint them in natural colors

Bird nests and feeders will be a useful decoration for your garden

Decor for a country interior

In addition to garden decor, a plastic bottle is good for creating an extravagant interior design for a country house. Bright panels for walls and furniture, partitions and screens, even curtains - you can do all this yourself from PVC containers. Such decorations for the home look quite original and original, at least you won’t see anything similar in anyone else’s. Putting your soul into decorating a country house, you will enjoy both the creative process and the results of your imagination, combined with skill.

By cutting the bottoms of transparent plastic bottles and connecting them with a thin wire, you will get air screens for separating the space of a country house

The rainbow curtain for the front door is assembled from ordinary bottle caps, but it looks very original.

Plastic bottle caps will help you paint the interior of a country house in all shades of the rainbow

Entertainment, recreation, games in the country

Playgrounds

Playgrounds on the land are not only a pleasant thing for organizing leisure time, they are also a certain element of garden decor. Bright swings and slides, mini-golf courses and fabulous houses will create a pleasant atmosphere for a child to stay in the country.

Plastic bottles will help separate the area for children's games, and will also serve as the basis for creating interesting toys.

Equip a field for playing croquet in your country house, and make gates from plastic bottles

Boats and watercraft

Surely there is a river or a lake near your garden plot. If so, then your vacation on the shore of the reservoir will become more exciting if you have a means of transportation on the water. Getting to a deserted island, going on a boat trip or fishing - nothing is easier when you have a boat. You can easily build this simple transport from plastic bottles.

A narrow boat similar to an Indian pirogue with a capacity of 1-2 people or a larger boat for 3-4 passengers - there are a lot of options. The simplest watercraft is a rectangular raft, from which it is convenient to fish, having sailed a little from the shore.

From plastic bottles you get a boat or raft that is quite stable on the water.

To make a boat in the form of a kayak, cut the bottom of the bottles, thread one into the other one after the other and form something like long tubes. Glue the joints with furniture tape - it is wide and will not peel off when in contact with water. From separate tubes, connecting them together, glue the sides and bottom of the boat with the same adhesive tape to get a wedge-shaped shape. Here it is important to correctly calculate the ratio of the width of the vessel and its height - trial launches and a little engineering will help you to turn a mountain of unnecessary containers into a useful thing.

A non-trivial approach to decorating a pond in the country - delicate daisies from bottles on the surface of the water

A more complex design for a boat for the whole family, which involves the connection of vertically standing bottles in two rows and additional sealing of the ship's hull with bags. Nothing prevents you from installing a motor on the boat, which will significantly improve its driving performance and range. So, using the unsinkable properties of plastic bottles, from which, by the way, entire islands are built in Japan and Taiwan, you can surf the surrounding water bodies with breeze and comfort.

Haven't you embraced the idea of ​​a plastic boom yet? Do something extraordinary for your garden and you will not have time to look back, as you will immediately join the ranks of admirers of a plastic bottle.

Crafts from plastic bottles: Lake of beauty and more

Everything ingenious is simple! It's just so unbelievable!

I know a lot of people throw away bottles, but I'm not one of them! I've been collecting them diligently all summer! My soul felt - plastic bottles will come in handy for me. See what interesting crafts you can make from plastic. I assure you - there is a place for a flight of fantasy and skill! Photos, descriptions of works will perfectly help you in creating unique crafts.

THE FIVE BEST IDEAS

1. IDEA - BLUE LAKE (photo at the beginning of the message)

This wonderful lake from plastic bottles was created by Elena Ryzhova and Zinaida Tikhova, residents of the city of Uglich. At the competition dedicated to the anniversary of the city, they received 1st place for the presented project. And, you see, it's a good idea. Although such a lake is made elementary!

1. To create this craft from plastic bottles, you only need the bottoms of the containers. Although the bottoms are a conditional definition: it is better to cut the bottles in half in order to more reliably stick them into the ground or sand. The more bottoms - the more natural, the lake will turn out to be larger.

2. In the process of preparing the bottoms, you need to paint the color of the water (blue, blue, turquoise). It is better to paint from the inside so that the surface is protected: this will guarantee the durability of the garden crafts. You can paint with a brush or just pour a small amount of paint into each bottom, and then “shake” it so that it spreads along the walls.

3. It turns out very beautiful: the color of the water plus the corrugated wavy shape of the bottom. What you need for a decorative pond.

5. It remains to prepare the site: dig up so that the soil is soft. Now we just stick the bottoms with slices into the ground very tightly to each other, organizing the “water surface”.

6. It remains to arrange the coast. Here it is done with the help of stones painted white (emphasizes the blueness of the water).

7. And, of course, we populate the decorative lake with figurines (water lilies, frogs, herons), and also decorate with plants.

In the development of this idea for the garden: in this way you can make a stream, a river (it would be nice with a decorative boat), and even a waterfall.

2. IDEA - A LOCK FROM PLASTIC BOTTLES

The magic castle on the site looks interesting. It can decorate a playground or an alpine slide, and, in general, any corner of the garden.

In addition, such a castle can not only be decorated in different ways, but also “build” it in such a shape as you like. Moreover, the shape of one castle can be changed from time to time.

The design of the castle includes single crafts from plastic bottles of different sizes and plastic bottles. How many separate containers - so many separate buildings.

You don't have to limit yourself to building a castle. It is better to resort to the development of ideas for a garden and build a street with colorful houses, a town, a village, etc. There is also no need to line up crafts from plastic bottles: if you make a town where you can walk between the buildings, it will be very original.

Children especially love such play towns. You can populate a castle or town with "inhabitants": toy figures of men. Or perhaps your child will discover the movement of toy cars through the streets of the town.

In the course of developing the idea for a garden, you can make “almost real” paths: from stones, bricks, tile remnants, etc., plant flower beds from miniature (undersized) plants.

The type of castle or town depends on what size and shape of plastic containers you choose (small, large, round, rectangular), as well as their painting. You can paint containers both inside and outside. Background coloring is easier to do by pouring a little bit of paint into each plastic bottle and turning it so that the paint "captures" the entire surface of the container. Draw the details of the turret houses with a brush (this, of course, will work better from the outside).

Be sure to secure crafts from plastic surfaces so that the town does not destroy the wind. You can pierce each bottom of the bottle-house with some kind of pin, rod, and then “plant” it in the ground. You can simply pour stones into containers to make them heavier.

By the way, a castle or a town can be decorated with various natural materials: make buildings lined with small pebbles (pebbles, crushed stone), pieces of tiles. For this, cement or special glue for facade work is used.
Ideas for a garden of such a plan are very multifaceted, if you take up the construction of a decorative castle or town, perhaps crafts from plastic bottles themselves will “tell” you the design.

3. IDEA - MAGIC LIGHTS OF WISHES

DIY garden ideas are so capacious that an ordinary plastic bottle can be turned into an “almost magical” object. And, quite simply.

For example, Chinese wishing lanterns are considered magical. Real Chinese wishing lanterns are flying (they are filled with hot air or gas). But they do not fly all the time: waiting for a special occasion, Chinese lanterns play the role of garden or house decorations (in a suspended state), as well as original lamps.

Crafts for the garden in the form of Chinese lanterns are a grateful thing. The material is free, available in unlimited quantities. The technique is the simplest. But it requires accuracy.

How to cut a plastic bottle straight?
In order for the strips of the Chinese lantern to turn out even, first of all, the bottle must be marked. It is better to do this with a felt-tip pen: the lines are clearly visible on the plastic, and it is washed off easily.
It seems that cutting a plastic bottle evenly is difficult: the plastic of the future garden craft will bend when cut. In fact, everything is simple. An empty bottle must be closed with a lid, and puncture holes should be made with a red-hot awl or carnation at the beginning of the lines (for example, at the neck). And from these holes, slowly, we cut with sharp scissors along the lines. Get perfectly even stripes.

How to make spherical crafts from plastic bottles
When you cut the bottle into strips, the bottle will still hold its shape. Therefore: in the bottom we make two holes with a red-hot awl and stretch the fishing line through them to the neck. The more we stretch, the more the shape of the craft from plastic bottles becomes like a ball. We fix the ends of the fishing line on the neck (tie, wrap, or make more holes).

The blank for garden crafts from plastic bottles is ready. Let's start turning it into a Chinese lantern.

How to color a Chinese lantern
First of all, the blank must be painted with bright colors (acrylic, for example, but oil can also be used). Paint carefully, with a thin brush, so as not to stain adjacent strips. This is a simple coloring option, but bright and beautiful.

The second option: painting the craft in one color (red, for example), and applying hieroglyphs to the strips with contrasting paint. It turns out amazing, despite the fact that the strips diverge (or maybe because of this). In itself, decorating crafts from plastic bottles with hieroglyphs is interesting. But you can apply hieroglyphs with meaning. For example, the characters for “love”, “health”, “well-being”, etc. You can find many images of characters on the Internet, so this is not a problem. Painted crafts can be opened with varnish - they will look generally amazing.

Look at real Chinese lanterns, maybe you will come up with ideas for additional decorations. Do not try to repeat the decorations exactly the same: real Chinese lanterns and shapes are different and decorated in different ways.

How to hang a flashlight or make a lamp out of crafts
Hanging Chinese lanterns on tree branches, attaching to a street canopy, gazebo, is very simple. We insert a stick with a tied fishing line, twine, ribbon into the neck, and turn it so that it stands up. Can be hung.

It is also easy to make a lamp out of such crafts for the garden. Only first you need to insert a wire through the neck of the workpiece and fix it. It's simple, since the neck is narrow, you can use a washer, a plate with a hole, just seal it with some non-combustible material. Option: close the neck with a cork, make a small hole in it so that the wire is pulled through, but with difficulty. The light bulb can be screwed in by spreading the strips of the craft.

The embodiment of this idea for a garden with your own hands - an elegant and, no doubt, magical Chinese lantern (wish-fulfilling) - will bring you pleasure and decorate your site in an original way. And, of course, do not waste time on trifles: make not one, but several of these lanterns - after all, you have many desires. By the way, such crafts for the garden can be made from bottles of different sizes: 0.5 l, 1 l, 1.5 l, 2 l. Together, bright, elegant lanterns of different sizes look just great.

4. IDEA - MAGIC COW

A cute cow for a summer cottage can be made from a plastic bottle. It is desirable that the bottle be large enough in size and square in cross section.
In this case, the ease of making this garden craft is amazing. Some firms sell drinking water in square plastic bottles, but more often building and automotive liquids are packaged in such bottles. In principle, anyone will do to implement the idea for a garden in the form of a magical cow.

Why is the cow magical?
A cow on the site is a natural phenomenon. But the magic begins with the understanding that the cow is actually a symbol of prosperity. This animal gives not only milk, but also attracts material values, that is, wealth. Remember the definition of "cash cow". However, this applies not only to dairy products?
Agree, it is very interesting to implement symbolic ideas for the garden. Crafts from plastic bottles can play a role in this matter. After all, any animal, any flower, any symbol can be created from plastic bottles. Let them decorate the site and at the same time attract love, luck, money, success, etc. to us.

Magic cow: stages of transformation of crafts from plastic bottles

In principle, there is not much work to implement this idea for a garden - a magical cash cow.

You only need 1 bottle. Whole. And you don't even have to cut it.
It is advisable to immediately fill the bottle with sand - to give stability to crafts made from plastic bottles.
Paint the bottle brown / black, white, pinkish cow paint. In principle, the color of the paints may be different. Do not listen to advisers who say that cows of this color do not exist - your cow is magical.
The legs of crafts from plastic bottles - a magic cow - are easy to make from pieces of a plastic pipe. You can fix it by heating a section of a plastic pipe over a fire and quickly attaching it to a plastic bottle. In this case, the details will "weld". But you can use other methods of fastening: make slots, screw with wire, glue, etc.
Ears and horns crafts for the garden will definitely have to be inserted into the slots. You can make them from an ordinary plastic bottle of any capacity - just cut it out.

Here is such a cow turned out!

5. IDEA - BRIGHT SPACE BEES

Anyone who created crafts from plastic bottles knows that any animal, insect or flower can be made using this material.

Therefore, if ideas for a garden in this regard overwhelm your head, you should not limit yourself. Plastic bottles are perfectly painted (with acrylic paints, oil paints, aerosol paints - from spray cans, etc.), they are easy to cut with scissors or a knife, if necessary, you can shape the workpiece by heating it over a fire. The mount with which such crafts for the garden are assembled is also not a problem: as an option, holes are made in the plastic, after which the parts are connected with wire.

As an idea for a garden, we suggest considering bright wasps. Their appearance is quite interesting, even "cosmic". Probably, this effect was due to the shape of the eyes. If you want wasps-"earthlings", just make the eyes of a different shape, rounder.

Step-by-step production of crafts from plastic bottles -
space wasps

You will need 1.5-2 liters of plastic bottles with a narrow "waist" (middle part). For 1 wasp - 3 pieces. But the crafts will turn out to be large, clearly visible against the background of greenery in the garden.
The body of the wasp is quite simple to make: you will need to cut off the bottom of 1 bottle, and the top of the other (about 1/3 of the bottle). By connecting these parts, get a body with a bend.
It is also not difficult to make a wasp head: for this you need to cut off the upper part of the third bottle (neck to shoulders) and connect it to the bottom.
Thick wire is used as the paws of this wonderful garden craft.
Wings are easy to cut out of a clear plastic bottle.
It remains to paint your creations with yellow and black paints and find a "landing pad" in the garden for them.

What is the most pleasant: crafts from plastic bottles: whether it is wasps, bees, dogs and other living creatures - they do not bite!